EASYPatio is a high-tech product for the renovation of failing mortar joints in patios and paths, ...EASYPatio is a high-tech product for the renovation of failing mortar joints in patios and paths, suitable for all paving types. It offers an easy-to-use alternative to traditional mortar joints. Activated by water, this strong and durable patio grout repair forms a strong, flexible joint that deters weeds and crawling insects. The joint compound adheres to the paving sides without shrinking and resists erosion from water, frost, wind, and cleaning. To use, open the tub and tip enough material to fill the joint areas. Sweep the product into the joints until full, gently firm the surface with a tool, and apply more product as needed until the joint level is just below the paver's surface. Wet the joints with a fine spray until no more water is absorbed. Each 5kg tub contains ready-mixed patio filler, ideal for repairing only the sections of paving where existing mortar joints have failed, saving money. Azpects Ltd specialises in developing and manufacturing products for outdoor hard-landscaping, aiming to make construction and care challenges easy and less frequent.
This guide is for homeowners and DIY enthusiasts looking to repair patio and path joints. EASYJoint Easypatio offers an easy-to-use solution for replacing failing mortar joints, providing a durable and weed-resistant finish. Note that while EASYJoint is easy to apply, proper surface preparation is crucial for optimal results.
All features
Model Part Number
8003
Brand
Azpects
Extended Product Information
FAQs
How long does it take for EASYJoint to cure?
Curing time depends on weather conditions, but it generally takes a few days to a week to fully cure.
Can EASYJoint be used on vertical surfaces?
EASYJoint is primarily designed for horizontal surfaces, such as patios and paths. Vertical applications are not recommended.
How much EASYJoint do I need?
The amount needed depends on the size of the joints and the area to be covered. Check the packaging for coverage details.
Is EASYJoint resistant to oil and other chemicals?
EASYJoint offers good resistance to many common chemicals. Avoid direct and prolonged exposure to strong solvents.
How should I store unused EASYJoint?
Store unused EASYJoint in a cool, dry place, and reseal the tub tightly to prevent it from drying out.
Can I use EASYJoint in freezing temperatures?
Avoid applying EASYJoint when freezing temperatures are expected within 24 hours.
What tools do I need to apply EASYJoint?
You'll need a brush or squeegee for spreading, a tool for firming the surface, and a watering can or spray bottle for wetting.
Troubleshooting
Joint material is not setting properly.
Ensure the joints are adequately wetted with water during application. Check the weather conditions; the product may not cure properly in cold or damp environments.
Cracking appears in the joints after curing.
Ensure the joints are clean and properly prepared before application. Excessive ground movement might also be a factor.
Product is difficult to spread.
Make sure you're using the correct amount of water for activation.
Pros and Cons
Pros
Easy to apply, even for beginners.
Forms a durable and long-lasting joint.
Helps prevent weed growth and insect infestations.
Resists damage from weather and cleaning.
Ready-mixed formula saves time and effort.
Cost-effective solution for joint repair.
Cons
Requires proper surface preparation for best results.
Color options may be limited.
May require multiple applications for severely damaged joints.
Needs time to fully cure after application.
Availability may vary by location.
Requires appropriate weather conditions for application.
Setup, Compatibility & Care
Preparation: Ensure the joints are clean and free of debris. Remove any old mortar or loose material.
Application: Open the tub and tip enough material to fill the joint areas. Sweep the product into the joints until full.
Firming: Gently firm the surface with a tool. Apply more product as needed until the joint level is just below the paver's surface.
Watering: Wet the joints with a fine spray until no more water is absorbed.
Compatibility: Suitable for all paving types, including natural stone, concrete, and paving slabs.
Care: Avoid heavy cleaning or pressure washing for the first few weeks after application to allow the joint to fully cure. Regular sweeping can help maintain the appearance.