Best current price£30.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£30.99Visit shop (Current Transformer 100A:50ma For Multiplus-Ii (5M) Wire-End) Current Transformer 100A:50ma Multiplus-Ii 8719076059080
Visit shop2 offers from £30.99 - £54.00
View price history by clicking the chart icon.
This Victron Energy CTR120000550 current transformer is designed for users of MultiPlus-II and MultiGrid-II systems who want to enhance their energy management capabilities. Its key benefit is enabling advanced features like PowerControl and PowerAssist, along with optimizing self-consumption through external current sensing. A key consideration is that it measures current indirectly and requires careful installation on a single conductor. This transformer provides an output current proportional to the main conductor's current, up to a nominal 100A.
| Brand | Victron Energy |
|---|
The Victron Energy CTR120000550 has a nominal current rating of 100A, with a maximum allowable current of 120A.
The transformer provides an output current of 50mA, which is proportional to the current flowing through the monitored conductor.
This specific transformer (CTR120000550) is designed for use with Victron Energy MultiPlus-II and MultiGrid-II systems.
The transformer is designed to fit around conductors with a maximum diameter of 12-13mm.
No, the included 5-meter cable is wire-ended, meaning it does not have a pre-attached connector and requires direct wiring.
Install by clamping it around a single conductor and connecting the wire-ended cable to the designated sensing input on a compatible Victron inverter, then configure it via software.
It means the transformer measures the magnetic field generated by the current flowing through the conductor, rather than directly measuring the current itself. This is a safe and non-invasive method.
Ensure the transformer is correctly clamped around a single conductor and that the connection to the inverter is secure. Verify that the transformer settings are correctly configured in the inverter's software.
Check the physical connection of the transformer's cable to the inverter. Ensure the correct model and settings for the current transformer are selected in the inverter's configuration.
Verify that the inverter firmware is up-to-date and supports the current transformer. Double-check the wiring of the transformer's cable to the appropriate sensing port on the inverter.
Setup:
Compatibility:
Care:
