Best current price£158.89from PCHUB.UK
Shopping.co.uk recommended and popular offers
PCHUB.UK£158.89Visit shop Tp-Link Omada 16-Port Gigabit Smart Switch With 8-Port Poe+
Visit shop7 offers from £158.89 - £223.27
View price history by clicking the chart icon.
The TP-Link JetStream TL-SG2016P is a managed network solution ideal for small to medium-sized businesses seeking to upgrade their network infrastructure. Its key benefit is providing 16 Gigabit Ethernet ports, including eight PoE+ ports, for powering devices like IP cameras and access points, alongside robust management features. A potential caveat is that it requires a degree of network knowledge for full utilization of its advanced features, though basic deployment is straightforward. It offers centralized cloud management via the Omada SDN Controller, comprehensive L2/L2+ features, and a significant total PoE power budget.
| Series | JetStream |
|---|---|
| Model Part Number | TL-SG2016P |
| Brand | TP-LINK |
The TL-SG2016P has a total PoE power budget of 120W, with individual ports supporting up to 30W each according to the 802.3af/at standard.
Yes, the switch supports centralized cloud management through the TP-Link Omada SDN Controller and can also be managed via its web-based GUI or Command-Line Interface (CLI) if accessed remotely over a secure connection.
VLANs can be configured through the switch's web-based management interface or the Omada SDN Controller. You can assign ports to specific VLAN IDs or configure tagged VLANs for devices that support them.
The TL-SG2016P is primarily a Layer 2 switch with some Layer 3/4 features like static routing capabilities. For complex routing, it is designed to work in conjunction with a dedicated router or gateway.
The switch has a switching capacity of 32 Gbps, allowing for high-speed data transfer between connected devices.
No, this switch features a fan for heat dissipation to ensure stable operation under load. It is important to ensure adequate ventilation.
The dimensions of the switch are 286 mm (Width) x 111.7 mm (Depth) x 25.4 mm (Height).
Ensure the power adapter is securely connected to the switch and a working power outlet. Check the LED indicators for power status.
Verify that all Ethernet cables are properly seated and functional. Check the link status LEDs on the switch. Ensure the device's IP configuration is correct for the network segment.
Confirm that the device is connected to one of the 8 PoE+ ports. Check if the total PoE power consumption exceeds the 120W budget. Ensure the connected device is compliant with 802.3af/at standards.
Check for network bottlenecks. Ensure the switch's firmware is up-to-date. Review QoS settings and VLAN configurations for any misconfigurations. Clean any potential obstructions near the fan for proper ventilation.
Ensure your computer is connected to the same network as the switch. Try accessing the switch via its default IP address or by using the Omada SDN Controller. Reset the switch to factory defaults if necessary, following the manual's instructions.
Setup:
Compatibility:
Care:
