Best current price£37.49from eBay
Shopping.co.uk recommended and popular offers
eBay£37.49Visit shop LIBERON SUPERIOR DANISH OIL 2.5L
Visit shop
B&Q£43.10Visit shop B&Q - 039231 Superior Danish Oil 2.5 Litre Libsdo25L
Visit shop4 offers from £37.49 - £54.99
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals seeking to enhance and protect both interior and exterior wooden surfaces. The key benefit is achieving a rich, natural satin-to-gloss finish while providing robust protection against daily wear and UV damage. A potential caveat is the need for proper surface preparation and application to achieve optimal results. Liberon Clear Superior Danish Oil 2.5L is a high-quality wood treatment that nourishes, protects, and beautifies wood using a blend of pure tung oil and natural oils, featuring UV filters for added defense against sun damage and a quick-drying formula.
| Model Part Number | 039231 |
|---|---|
| Brand | Liberon |
One litre of Liberon Superior Danish Oil covers approximately 10-12 square meters, depending on the absorbency of the wood.
The oil is fully dry in approximately 5 hours under normal conditions, allowing for recoating after this period.
No, the wood must be stripped back to bare wood for the oil to penetrate and protect effectively. It is not suitable for use over existing varnish or paint.
Yes, it is suitable for kitchen worktops and offers good resistance to water and heat. Ensure adequate coats are applied and allow for proper curing.
Wipe up any spills immediately. Tools can be cleaned with white spirit before the oil dries.
The oil enhances the natural color of the wood. It provides a rich, warm tone but does not typically add a strong tint. Always test on a small area first.
It is recommended to use this oil on bare wood. If applying over a stain, ensure the stain is fully dry and compatible, and test in an inconspicuous area first.
Ensure excess oil was wiped off thoroughly after each application. Uneven absorption can occur on woods with varied densities; apply thinner coats and ensure consistent wiping.
The wood may be very absorbent. Apply additional thin coats, allowing adequate penetration time and wiping off all excess.
Drying times are dependent on temperature and humidity. Ensure application in a well-ventilated area with moderate conditions. Thick application can also slow drying.
This can happen if excess oil was not removed properly. Buff the area with a fine steel wool (grade 0000) and a clean cloth.
Preparation: Ensure the wood surface is clean, dry, and free from dust, grease, and old finishes. Lightly sand the surface if necessary, starting with a coarser grit and finishing with a finer grit, then remove all dust.
Application: Apply Liberon Clear Superior Danish Oil thinly and evenly with a brush, cloth, or by dipping. Allow the oil to penetrate the wood for 15-30 minutes. Wipe off any excess oil thoroughly with a clean, lint-free cloth. Apply a second coat after 5 hours if desired, repeating the process. For interior use, up to three coats may be applied.
Compatibility: Suitable for all interior and exterior hardwoods and softwoods. Always test on an inconspicuous area first.
Care: Clean surfaces with a damp cloth. For re-oiling, ensure the surface is clean and dry, then apply a maintenance coat as needed.
