Fernox Solder Wire Lead Free 500G - 3.25mm
Best current price£31.49from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£31.49Visit shop POWERFLOW FERNOX LEAD FREE SOLDER WIRE 3.25mm 500g GRADE 99C 8 METRES - NEW
Visit shopeBay£31.49Visit shop All Offers
2 offers from £31.49 - £43.20
View price history by clicking the chart icon.
eBayPOWERFLOW FERNOX LEAD FREE SOLDER WIRE 3.25mm 500g GRADE 99C 8 METRES - NEW
Free delivery in 1–3 days
£31.49
Visit shop
Product Information
Full details
This guide is for plumbers and DIY enthusiasts needing to create strong, reliable joints in plumbing systems. The Fernox Solder Wire offers a lead-free solution, ensuring safety for potable water applications. Keep in mind that proper soldering techniques and ventilation are essential for optimal results and safety.
All features
| Model Part Number | 5016009122914 |
|---|---|
| Brand | Fernox |
Extended Product Information
FAQs
What type of pipes can I use this solder with?
This solder is specifically designed for use with copper pipes and fittings.
Is this solder safe for drinking water?
Yes, this solder is lead-free and safe for potable water applications.
What is the recommended diameter?
The Fernox Solder Wire has a diameter of 3.25mm.
Do I need to use flux with this solder?
Yes, using flux is essential for cleaning the surfaces and helping the solder flow properly into the joint.
How do I clean the joint after soldering?
After the joint has cooled, wipe away any excess solder and flux with a damp cloth.
What safety precautions should I take?
Wear appropriate safety gear, including gloves and eye protection. Ensure adequate ventilation during soldering to avoid inhaling fumes.
Where is the solder manufactured?
The solder is manufactured by Fry's Metals.
How should I store this solder wire?
Store the solder wire in a dry place to prevent corrosion.
Troubleshooting
Solder not flowing into the joint
Ensure the joint is clean, apply more flux, and increase the heat. Make sure the fitting is hot enough to melt the solder.
Joint leaking after soldering
Check for insufficient solder or gaps in the joint. Re-heat the joint and add more solder, ensuring it flows properly. Clean the area before re-soldering.
Solder appears grainy or rough
The joint may have been overheated. Use a lower heat setting, or allow the joint to cool before adding more solder.
Pros and Cons
Pros
- Lead-free composition ensures safety in potable water systems.
- High tin content provides strong and reliable joints.
- Suitable for all plumbing applications, offering versatility.
- Easy to use with a 3.25mm diameter.
- Manufactured by a trusted brand, ensuring quality.
Cons
- Requires proper soldering techniques for optimal results.
- Ventilation is needed when soldering.
- May require more heat compared to lead-based solders.
- Care must be taken to avoid overheating the solder.
- Proper cleaning of the joints is necessary before soldering.
Setup, Compatibility & Care
Setup
- Prepare the Surfaces: Clean the copper pipes thoroughly with emery cloth or a pipe cleaning brush to remove any oxidation or debris.
- Apply Flux: Apply a thin, even layer of flux to both the inside of the fitting and the outside of the pipe.
- Assemble the Joint: Insert the pipe fully into the fitting.
- Heat the Joint: Apply heat evenly around the fitting and the pipe using a torch.
- Apply Solder: Once the joint is hot enough, touch the solder wire to the gap between the pipe and the fitting. The solder should flow smoothly into the joint.
- Cool and Clean: Allow the joint to cool completely. Wipe away any excess solder and flux with a damp cloth.
Compatibility
The Fernox Solder Wire is compatible with:
- Copper pipes and fittings.
- Potable water systems.
- Most plumbing applications.
Care
- Store the solder wire in a dry place to prevent corrosion.
- Avoid excessive heat when soldering to prevent solder degradation.
- Always use appropriate safety gear, including gloves and eye protection.
- Ensure adequate ventilation to avoid inhaling fumes during soldering.