Best current price£20.39from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£20.39Visit shop Ahuntter 5 Pack Anti Slip Safety Tape 50Mm X 5M Hazard Warning Grip Tape For Stairs High Traction Self Adhesive Safety Marking Barrier Tape For Floor 695510259620
Visit shop1 offer from £20.39
View price history by clicking the chart icon.
The AHUNTTER Anti Slip Safety Tape is an essential safety solution for facility managers, homeowners, and warehouse supervisors looking to mitigate fall risks in high-traffic areas. By utilizing high-friction, grit-coated surfaces, it provides an immediate improvement in traction for stairs, loading docks, and ramps. While it offers industrial-grade adhesion and weather resistance, users should note that the adhesive requires a perfectly clean and dry surface to ensure long-term durability, as moisture or debris will compromise the bond.
| Brand | AHUNTTER |
|---|
Yes, the material is resistant to moisture and weather, making it suitable for outdoor stairs and walkways, provided the surface is prepped correctly.
Each roll is 50mm wide, which is the standard size for most stair treads and safety hazard demarcations.
Because it uses a strong natural rubber adhesive, removing it from delicate finishes like polished wood might pull up the finish. Use a heat gun to soften the adhesive during removal.
The grit is quite coarse to provide maximum slip resistance; it is generally intended for footwear and may be abrasive if used on floors where people walk barefoot.
The pack includes 5 individual rolls, each 5 meters long.
The surface was likely not clean or dry enough during application. Remove, clean the floor thoroughly with a solvent, and apply a new strip.
Porous concrete often requires a concrete sealer or primer before applying adhesive tapes to ensure a proper bond.
The grit particles are likely clogged with dirt or grease. Scrub the tape with a mild detergent and a stiff-bristled brush to restore texture.
For the best results, ensure the installation area is completely free of dust, oil, and moisture; using a degreaser or isopropyl alcohol is recommended for industrial floors. Peel the backing away slowly while pressing the tape firmly into place with a rubber roller to eliminate air bubbles and ensure full contact with the substrate. Once applied, allow the tape to cure for at least 24 hours before subjecting it to heavy foot traffic. The tape is compatible with sealed concrete, treated wood, steel, and epoxy-coated surfaces. Maintenance is simple: sweep away dirt periodically and use a stiff-bristled brush with water if the grit becomes clogged with mud or debris.
