Best current price£5.00from eBay
Shopping.co.uk recommended and popular offers
eBay£5.00Visit shop Zinc Plated Folded Straining Eyebolt Washer and Nut M6 150MM (Wire Support)
Visit shop
B&Q£9.50Visit shop B&Q - X10 M6 X 150mm Zinc Plated Folded Straining Eyebolts Nut & WasherWire Support Fencing Straining
Visit shop3 offers from £5.00 - £9.50
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals needing a robust solution for tensioning wires, fencing, or securing loads. The key benefit is the durable zinc-plated finish offering excellent corrosion resistance for outdoor use. A potential caveat is that these are specifically M6 size, so ensure compatibility with your project's requirements. These eyebolts are designed for creating secure attachment points, ideal for straining fencing wire, supporting cables, or creating anchor points for various applications. They come as a pack of 10, each M6 x 150mm with a folded design, complete with nuts and washers for straightforward installation.
| Colour | Silver |
|---|---|
| Model Part Number | SFFE066 |
| Brand | SecureFix Direct |
The product information does not specify a maximum load capacity. These are designed for straining fencing wire and similar moderate tension applications. Always assess the load and ensure the mounting material can support it safely.
No, these eyebolts are not rated for lifting applications. They are intended for tensioning and securing, not for overhead lifting which requires specialized, rated hardware.
While the specific base metal is not detailed, they are zinc plated for corrosion resistance, typical for steel eyebolts.
For a snug fit in wood, a drill bit slightly smaller than the thread diameter (e.g., 5mm or 5.5mm) is often recommended. For metal or masonry, consult specific drilling guides for M6 machine screws or anchors.
Yes, you can paint over the zinc plating for aesthetic purposes or additional protection. Ensure the surface is clean and dry before applying a suitable primer and paint.
A folded eyebolt is made from a single piece of metal bent into shape, whereas a forged eyebolt is made by shaping hot metal under immense pressure. Forged eyebolts are generally stronger and preferred for heavier load applications.
The hole drilled may be too large. Try using a washer on the front side to help secure the eyebolt, or consider using a larger diameter eyebolt if a larger hole is unavoidable.
Ensure the M6 nut and washer are correctly aligned with the eyebolt's thread. Check for any debris or damage to the thread. If the thread is damaged, the eyebolt may need replacement.
Minor surface corrosion can often be cleaned. For more significant corrosion, inspect the structural integrity. Reapply a zinc-rich paint for added protection if the base metal is exposed.
Setup:
Compatibility:
Care:
