Blackfriar Radiator Paint - White 250ml

This paint is specially developed for radiators, pipework, and storage heaters. It is designed for the high temperatures these components reach.

It is heat resistant up to 300 degrees Fahrenheit (approximately 150 degrees Celsius).

The paint is quick-drying, allowing for recoating after a few hours, though specific times can vary based on ambient conditions.

While it is a durable paint, it is specifically formulated for the unique requirements of radiators and heating systems. For general wall painting, a different type of paint would be more appropriate.

Surface preparation is crucial. While a primer is not explicitly mentioned as required, ensuring the surface is clean, dry, and lightly abraded if glossy will significantly improve adhesion and finish.

Coverage can vary depending on the surface porosity and application thickness. A 250ml can is generally suitable for one or two coats on an average-sized radiator or a moderate length of pipework.

This product is designed for indoor heating systems. For outdoor applications, a paint formulated for exterior use and weather resistance would be necessary.

Ensure adequate ventilation. Check that the temperature is within the recommended range for application and drying. Avoid applying overly thick coats.

Stir the paint thoroughly before and during application. Use a good quality brush or roller and apply in smooth, even strokes. Ensure the surface was properly prepared.

Ensure the paint is specifically designed for high-heat applications like radiators. Double-check that the surface was completely clean and dry before painting. The paint is rated for up to 300°F, so ensure operational temperatures do not exceed this significantly.