Best current price£2.63from City Plumbing GB
Shopping.co.uk recommended and popular offers
City Plumbing GB£2.63Visit shop Plumbright Black Solvent Weld Soil 110Mm Adaptor 63Mm X 40Mm Ssb0028
Visit shop1 offer from £2.63
View price history by clicking the chart icon.
This guide is for anyone using the Davant Solvent Soil Boss Adaptor, designed to connect pipes in soil systems. The key benefit is its reliable and secure connection, preventing leaks and ensuring long-term performance. However, proper solvent welding technique is crucial for optimal results. This guide will cover key features, usage, troubleshooting, and care instructions to help you get the most out of your adaptor.
| Model Part Number | SSB0028 |
|---|---|
| Brand | Davant |
Always use solvent cement that is specifically designed for use with the type of plastic pipe you are connecting. Follow the solvent cement manufacturer's instructions.
Refer to the solvent cement instructions for the recommended holding time. This typically ranges from a few seconds to a minute, depending on the cement and environmental conditions.
No, this adaptor is specifically designed for 63mm x 40mm pipes only. Using the wrong size could lead to leaks.
If the joint leaks, you may need to cut the pipe and adaptor, clean the surfaces, and re-apply solvent cement. Ensure the installation follows the correct procedures.
Store solvent cement in a cool, dry place, away from direct sunlight and heat. Always keep the container tightly closed.
Check the pipe and solvent cement specifications to ensure compatibility with hot water. Typically, these adaptors are designed for cold water and waste applications.
No, it is generally not recommended to reuse an adaptor once it has been solvent welded. It could compromise the integrity of the connection.
Ensure that the solvent cement was applied correctly and that the pipe was inserted fully into the adaptor. Check for any cracks in the adaptor or pipe. Re-apply solvent and re-join if necessary.
Make sure the pipe ends and the adaptor are clean. If necessary, slightly chamfer the pipe ends to ease insertion. Use appropriate force, but avoid excessive force that could damage the components.
Check for any obstructions or blockages in the pipe. Ensure that the pipes are properly aligned and that there are no kinks or bends that could restrict the flow.
