Best current price£7.91from eBay
Shopping.co.uk recommended and popular offers
eBay£7.91Visit shop 1m x 67.5cm Tropea Oak Nature Wood Sticky Back Plastic Self Adhesive Vinyl
Visit shop
B&Q£8.81Visit shop B&Q - Tropea Oak Nature Wood Woodgrain Sticky Back Plastic Self Adhesive Vinyl 1M X 67.5Cm
Visit shop7 offers from £7.91 - £54.14
View price history by clicking the chart icon.
This D-C-Fix Self Adhesive Vinyl in Tropea Oak Nature Wood is for DIY enthusiasts and homeowners looking for a quick and affordable way to update furniture, countertops, and other surfaces with a realistic woodgrain effect. Its key benefit is providing a stylish, hassle-free refresh without major renovations. A caveat to note is that it's not suitable for direct contact with hot pans and requires sealing around wet areas like sinks.
| Model Part Number | Tropea Oak Nature Wood Woodgrain |
|---|---|
| Brand | d-c-fix |
The vinyl is wipe clean. Use a damp cloth and mild soapy water for general cleaning. Wipe up spills immediately to prevent staining.
The vinyl is heat resistant up to 70°C, but it is not suitable for direct contact with hot pans or surfaces that exceed this temperature.
It works best on smooth, flat surfaces such as wood, metal, glass, and painted walls. Avoid textured or rough surfaces.
You can use a hairdryer to gently warm the vinyl. Once warm, it should peel off relatively easily. Be careful when removing from painted surfaces, as some paint may come off with the vinyl.
Yes, it is safe for kitchen use. However, it is recommended to use a sealant around sinks and hobs to prevent water or heat from causing the edges to lift.
Yes, multiple meters can be purchased as a continuous piece, up to a maximum length of 15 meters.
Each roll is 1 meter in height and 67.5cm in width.
The product comes with a 1-year guarantee.
Gently lift the vinyl back to the point of the bubble and reapply, smoothing it out as you go. For small bubbles, you can try piercing them with a fine needle and pressing the air out.
Ensure the surface is thoroughly clean, dry, and smooth. If the surface is porous, consider applying a primer first. Make sure all edges are firmly pressed down.
Use a hairdryer on a low setting to gently warm the vinyl. This makes it more pliable and easier to stretch and mold around curves and corners. Press firmly once in place.
Apply a clear, waterproof sealant along the edges where the vinyl meets the surface, especially in kitchens and bathrooms. This will create a barrier against moisture and heat.
If the vinyl is still repositionable, try to lift it and reapply. If bonded, gently warm the creased area with a hairdryer and smooth it out with a soft cloth. Minor creases may be hard to remove completely.
Setup:
Compatibility:
The vinyl can be applied to any flat, smooth surface including wood, metal, glass, and previously painted surfaces. It is not recommended for use on textured, rough, or overly porous materials.
Care:
