Speedball Water-Soluble Block Ink - 236.5ml

Yes, the colors can be mixed together on a separate palette or glass slab to create new shades. Always mix them thoroughly before applying to your printing block.

Drying time varies based on humidity, temperature, and ink thickness, but typically ranges from 15-30 minutes for a thin layer. For heavier applications or humid conditions, it may take longer.

Yes, Speedball Water-Soluble Block Printing Ink carries the AP (Approved Product) Seal, indicating it is non-toxic and safe for use by artists of all ages, including children under adult supervision.

This ink is designed for printing on paper and other porous surfaces. It works effectively with linoleum, wood, and soft block printing materials.

Clean all tools, brayers, rollers, and your printing plate immediately after use with soap and warm water. Dry them thoroughly to prevent rust or damage.

No, this ink is specifically formulated for block printing techniques (like linocut and woodcut) and is not suitable for screen printing.

When stored properly in a sealed container at room temperature, the ink should maintain its quality for a considerable period. Check for any signs of excessive drying or separation before use.

Add a very small amount of water (a few drops at a time) to the ink on a palette and mix thoroughly. Avoid adding too much water, which can make the ink too thin.

Ensure the ink is evenly distributed on your brayer and then on the block. Apply a thin, consistent layer of ink. Check that your printing surface (paper) is flat and properly supported.

Apply a thicker, though still even, layer of ink to the block. Ensure the block surface is properly prepared and free of debris. Use the pure colors for maximum vibrancy or mix them on a separate palette before applying to the block.

Work in a cooler environment if possible. Lightly misting your work area with water can help slow drying. You can also add a tiny amount of water directly to the ink on the palette as you work.