Best current price£23.00from very.co.uk
Shopping.co.uk recommended and popular offers
very.co.uk£23.00Visit shop D-C-Fix Milky Window Self-Adhesive Vinyl Window Film - 67.5 X 500 Cm
Visit shop
B&Q£27.97Visit shop B&Q - Milky 67.5Cm X 5M Self-Adhesive Vinyl Window Film For Privacy And Décor
Visit shop3 offers from £23.00 - £27.97
View price history by clicking the chart icon.
This D-C-Fix Milky Window Film is for homeowners and renters seeking an easy, affordable way to add privacy and decorative flair to glass surfaces without sacrificing natural light. Its key benefit is providing instant privacy and a modern aesthetic with a simple peel-and-stick application, making it ideal for bathrooms, kitchens, or any window where blinds or curtains are impractical. A potential caveat is the need to maintain a 2mm gap around the edges for optimal adhesion and removability.
| Colour | White |
|---|---|
| Model Part Number | VUJTJ |
| Brand | d-c-fix |
Yes, it can be applied to mirrors if the surface is smooth and clean. Ensure proper application techniques are followed for best results.
Clean the film with a soft, damp cloth and a mild, non-abrasive soap solution. Rinse with clean water and allow to air dry or gently wipe with a lint-free cloth.
The product information states it can be used on shower screens externally, implying some outdoor suitability. However, prolonged exposure to harsh weather conditions may affect its longevity. Always ensure the surface is smooth and clean.
When applying the film, use a ruler or straight edge as a guide to trim the film, ensuring you leave approximately 2mm of space between the film's edge and the window frame or seals.
Yes, due to its low-tack adhesion and the wet application method, you can peel back and reposition the film if it's not quite lined up correctly, as long as you work relatively quickly.
This specific product is 67.5 cm wide and supplied in custom lengths up to 500 cm.
No, the milky finish is designed to allow natural light to pass through while obscuring the view, reducing glare rather than blocking light completely.
Gently lift the edge of the film and use a squeegee to push the air or water out. If the film is already too set, try reheating the area with a hairdryer and smoothing it again. Ensure the surface was clean and wet before application.
Ensure the glass surface was clean, smooth, and sufficiently wet before application. Double-check that the required 2 mm gap around the edges has been maintained. Re-wet the surface if necessary and reapply.
Use a sharp craft knife or utility blade and a straight edge for precise cuts. Ensure the film is laid flat on a protected surface before cutting.
Apply heat uniformly to the film using a hairdryer on a medium setting. Peel the film slowly and steadily. Clean any remaining adhesive with ethanol or soapy water.
Setup:
Compatibility:
Care:
