Best current price£10.30from Autodoc
Shopping.co.uk recommended and popular offers
Autodoc£10.30Visit shop BREMBO Brake Fluid L 04 210
Visit shop
eBay£15.95Visit shop Brembo DOT 4 LV Brake Fluid 1 Litre Premium DOT4 Low Viscosity L04210
Visit shopeBay£19.11Visit shop Brake fluid DOT 4 LV Bottle L 04 210 BREMBO
Visit shop11 offers from £10.30 - £22.12
View price history by clicking the chart icon.
This Brembo Brake Fluid is designed for drivers seeking reliable braking performance, especially in demanding conditions. Its high-quality DOT 4 Low Viscosity formulation ensures consistent fluid behavior. A key benefit is its elevated dry and wet boiling points, which help prevent vapor lock. The primary consideration is ensuring compatibility with your vehicle's braking system, as incorrect fluid can cause damage.
| Model Part Number | L 04 210 |
|---|---|
| Brand | Brembo |
DOT 4 indicates the fluid meets specific performance standards. 'Low Viscosity' (LV) means the fluid has a thinner consistency, which improves flow and allows for faster response times in modern ABS and stability control systems, especially in cold temperatures.
It is generally recommended to replace brake fluid every 2-3 years or according to your vehicle manufacturer's service interval. This is because brake fluid absorbs moisture over time, lowering its boiling point and potentially causing corrosion.
You can typically mix Brembo DOT 4 LV fluid with other DOT 3 or DOT 4 fluids. However, to ensure optimal performance and prevent potential issues, it's best to flush the entire system and refill with fresh fluid.
While DOT 4 LV is widely compatible, always check your vehicle's owner's manual or consult a mechanic to confirm the exact brake fluid specification required. Using the wrong type of fluid can damage your braking system.
The 'dry' boiling point is the boiling temperature of fresh, uncontaminated brake fluid. The 'wet' boiling point is the temperature at which the fluid boils after it has absorbed a certain amount of moisture (typically 3.7% by volume). A higher wet boiling point indicates better performance over the fluid's service life.
Yes, DOT 4 fluids, including DOT 4 LV, are generally backward compatible with systems designed for DOT 3. However, it is always best practice to use the fluid specified by the vehicle manufacturer.
Low viscosity allows the brake fluid to flow more quickly and easily through the small passages and valves within the ABS unit. This enables the system to modulate brake pressure more rapidly and precisely, leading to shorter stopping distances and better vehicle control during emergency braking.
This typically indicates air in the brake lines. The system needs to be bled again. Ensure no leaks are present in the lines or connections.
Check the brake fluid level in the reservoir. If low, top up with the correct fluid type and check for leaks. If the level is correct, there may be an issue with the brake system sensors or hydraulic pressure.
This can occur if the fluid's boiling point has been compromised due to moisture absorption or overheating. A full brake fluid flush and replacement with fresh fluid is recommended. Check brake pads and rotors for wear.
Contamination or degradation has likely occurred. Flush the entire brake system and refill with fresh Brembo DOT 4 LV fluid.
Compatibility:
This Brembo DOT 4 Low Viscosity brake fluid is generally suitable for most vehicles that specify DOT 4 or DOT 3 brake fluid. However, it is crucial to consult your vehicle's owner's manual or a qualified mechanic to confirm the specific brake fluid requirements. Never mix DOT 4 LV fluid with silicone-based DOT 5 fluids. Mixing with conventional DOT 3 or DOT 4 fluids is typically acceptable but flushing the system is recommended for optimal performance.
**Setup (Brake Fluid Flush/Change):
**Brake fluid replacement should be performed by a qualified technician or an experienced DIY mechanic. The general process involves:
Care:
