Oxford Pro Fat Lock On Grips - HG802B
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Oxford Pro Fat Lock On Grips (HG802B) are designed for cyclists with larger hands or those seeking enhanced comfort and vibration absorption on their straight handlebar bikes. Their key benefit is the increased comfort and control provided by the larger diameter and thick rubber. A potential consideration is their specific suitability for 22.2mm handlebars.
All features
| Model Part Number | HG802B |
|---|---|
| Brand | Oxford |
Extended Product Information
FAQs
Are these grips suitable for drop handlebars?
No, these grips are specifically designed for straight handlebars with a 22.2mm diameter. They are not compatible with drop handlebars.
What is the main advantage of the 'Fat' design?
The 'Fat' designation refers to the larger 32mm diameter, which provides increased comfort and support, especially for riders with larger hands or those who experience hand fatigue.
How do I install the handlebar end plugs?
The end plugs are designed to be pushed or gently tapped into the open end of the handlebar. Some may have a slight expansion mechanism for a tighter fit.
Can I use these grips on e-bikes or motorcycles?
These grips are intended for standard bicycles with 22.2mm handlebars. While they might fit some e-bikes, they are not designed for the higher speeds or vibrations of motorcycles.
How long are the grips?
The Oxford Pro Fat Lock On Grips are 130mm in length.
What material are the grips made of?
The grips are made of thick, soft rubber for maximum vibration absorption.
Troubleshooting
Grips rotate or slip on the handlebar.
Ensure the alloy locking collar grub screw is fully tightened. Check that the handlebar surface is clean and dry before installation.
Difficulty sliding grips onto the handlebar.
Verify that the handlebar diameter is indeed 22.2mm. Ensure there are no obstructions or burrs on the handlebar. A small amount of isopropyl alcohol can act as a temporary lubricant, evaporating quickly once the grip is in place (use sparingly and ensure it's dry before tightening).
Locking collar screw is stripped.
Use a screw extractor tool designed for stripped screws. If unsuccessful, contact customer support for potential replacement options or advice.
Pros and Cons
Pros
- Increased comfort due to larger diameter and soft rubber.
- Reduced hand fatigue from effective vibration absorption.
- Secure fit preventing grips from slipping.
- Durable construction with alloy locking collar.
- Includes handlebar end plugs for added value and protection.
Cons
- Specifically designed for 22.2mm handlebars, limiting compatibility.
- Larger diameter may not suit riders with very small hands.
- Lock-on mechanism requires tools for installation/removal.
Setup, Compatibility & Care
Compatibility:
- These grips are designed for standard 22.2mm diameter handlebars, common on most mountain bikes, hybrids, and commuters.
- Ensure your handlebars are 22.2mm in diameter before purchase.
Setup:
- Remove your old grips (if applicable).
- Ensure the handlebar surface is clean.
- Slide the grip onto the handlebar, aligning the locking collar near the end.
- Using the appropriate tool (usually a hex/Allen key), tighten the grub screw on the alloy locking collar until the grip is firmly secured and does not rotate. Do not overtighten.
- Install the supplied handlebar end plugs into the ends of your handlebars.
Care:
- Clean the grips periodically with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners that could damage the rubber.
- Check the locking collar screws occasionally to ensure they remain tight.