Best current price£197.83from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£197.83Visit shop Bailey Products Drain Test Plug, Brass Cap 5063806089667
Visit shop
B&Q£215.90Visit shop - Bailey Products Drain Test PlugBr Cap Multi Colour (375mm (15In))
Visit shop2 offers from £197.83 - £215.90
View price history by clicking the chart icon.
The Bailey Products 375mm Drain Test Plug is designed for professional plumbers and contractors who require a dependable, high-pressure seal for air or water testing of drainage and sewer lines. Its core benefit lies in its heavy-duty steel construction, which provides reliable expansion and a secure, leak-free seal within pipes; however, users should note that as a metal-heavy tool, it requires proper maintenance to prevent corrosion in damp, long-term storage conditions.
| Model Part Number | 375mm |
|---|---|
| Brand | Bailey Products |
Yes, the Bailey 375mm Drain Test Plug is designed to handle the pressures required for both air and water testing protocols.
The wing nuts are designed for manual tightening. If hand-tightening does not provide a seal, check that the pipe surface is not excessively dirty or damaged.
Store the plug in a dry area. Wipe the steel surfaces down after use and ensure they are completely dry before placing them in a storage box.
It is compatible with most standard drainage pipe materials, provided the internal diameter is 375mm and the surface is relatively smooth.
Verify that the pipe is not lubricated with soap or grease. Clean both the pipe interior and the rubber plug surface with a dry cloth before re-installing.
Check the pipe for debris or rough surfaces that may be compromising the rubber seal. Ensure the plug is seated square within the pipe.
Clean the central threads of grit or dried residue and apply a small amount of lubricant.
Replace the rubber seal ring if it is damaged, as a compromised seal will result in inaccurate test results.
To set up the plug, ensure the pipe interior is clean and free from debris or jagged concrete, as these can damage the rubber seal. Insert the plug into the pipe, ensuring it is positioned straight to avoid uneven expansion. Tighten the wing nut firmly by hand until the rubber has made full, secure contact with the pipe circumference.
Compatibility: This plug is specifically sized for pipes with a 375mm internal diameter. It is not designed to be used in pipes larger or smaller than this specification.
Care: After each use, wash the plug in clean water to remove sewage residue or grit. Dry the steel plates thoroughly before storage to prevent rust. Applying a light coat of silicone grease to the threads of the center bolt will keep the wing nut moving smoothly and extend the life of the tool.
