Salamander Pump Hose Angled 22mm x 3/4" Inch Flexible Anti Vibration Coupler

This is a 22mm x 3/4" Inch coupler. It is suitable for most Salamander pumps that use a 22mm AV coupler. However, Salamander CT, CT+, RSP 50, and RGP 40 models use a 15mm coupler. Always check your existing fitting or pump specifications.

This coupler is specifically designed for Salamander pumps with the corresponding 22mm AV connection. Using it with other brands may result in incompatibility or leaks.

The isolation valves allow you to stop the flow of water through the coupler. This is useful for maintenance on the pump or connected pipes, preventing the need to drain a larger section of the system.

AV couplers are designed for longevity. However, inspect it periodically for signs of wear, cracking, or hardening. Replacement is recommended if you notice increased vibration transfer or leaks.

This product is for the Salamander 22mm Angled AV Coupler itself, which includes the built-in isolation valves. It does not typically include the flexible hose or other pipe fittings.

An angled coupler is useful in installations where space is limited. It allows the flexible hose to connect to the pump at an angle, which can prevent kinks and make routing easier compared to a straight coupler.

Ensure the coupler is screwed in tightly. Check that the flexible hose connection is secure and the sealing washer (if applicable) is in good condition. Verify compatibility with the pump outlet thread.

Confirm that this is the correct 22mm AV coupler for your specific Salamander pump model. Check if the coupler is properly seated and the pump itself is securely mounted. Consider if other components in the system are contributing to vibration.

While the coupler reduces vibration transfer, it does not eliminate pump operational noise entirely. Ensure the pump is functioning correctly. Check for blockages in the system that might cause the pump to work harder.