Old Dutch Internatio - H01RFB
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Old Dutch Internatio H01RFB (Ruffian Grips Half Waffle) are designed for motorcycle riders seeking a comfortable yet durable grip with enhanced control. Made in the USA with ODI's proprietary medium compound material, they offer a soft feel without compromising longevity. A potential consideration is the value pricing, which might appeal to budget-conscious buyers but may not offer the premium feel of higher-end alternatives.
All features
| Model Part Number | H01RFB |
|---|---|
| Brand | Old Dutch Internatio |
Extended Product Information
FAQs
What makes the 'medium compound' material special?
ODI's proprietary medium compound material is engineered over 25 years to provide an optimal balance between a soft, comfortable feel for reduced hand fatigue and a durable construction that resists wear and tear over time.
Are these grips suitable for all types of motorcycles?
These grips are designed for standard 7/8" handlebars, common on most motorcycles and ATVs. Always verify your handlebar diameter.
How does the half-waffle pattern improve control?
The raised half-waffle pattern provides additional contact points for your fingers and palm, increasing traction and preventing your hands from slipping, especially in wet or sweaty conditions. This leads to more precise control over the throttle and handlebars.
Can I install these myself?
Yes, installation is generally straightforward. It involves removing old grips and sliding on the new ones. Using grip glue is recommended for a secure fit, though some may use high-strength adhesive spray or other methods. Ensure proper technique to avoid damaging the grips or handlebar.
What is the main advantage of these grips over cheaper alternatives?
The primary advantage lies in the proprietary material compound and construction quality, which leads to superior comfort, durability, and control compared to generic grips. Being made in the USA also suggests a higher standard of manufacturing.
Do I need to cut the end off for my throttle tube?
These grips have a closed end. If your motorcycle's throttle tube requires an open end for the throttle mechanism, you will need to carefully cut off the end of the grip. The material is designed to be cuttable.
How should I clean my ODI grips?
Clean your grips using mild soap and water with a soft cloth or sponge. Avoid harsh chemicals or abrasive cleaners that could damage the proprietary compound material. Rinse thoroughly and allow to air dry completely before use.
Troubleshooting
Grips feel too soft or too hard.
The H01RFB model is specifically a 'medium compound'. If a different feel is desired, consider other ODI grip models designed for softer or harder compounds.
Grips are difficult to slide on.
Ensure the handlebar is clean and dry. A small amount of isopropyl alcohol or grip glue can help them slide on more easily. If using glue, allow proper drying time.
Grips are slipping during use.
If grip glue was used, ensure it has fully cured. If not, or if glue has failed, remove the grips, clean both surfaces, and re-install using a quality grip glue. Check for any contamination like oil or grease on the handlebar or inside the grip.
Half-waffle pattern is uncomfortable.
The half-waffle pattern is designed for control. Rider preference varies; consider trying a full waffle or diamond pattern grip if this specific texture is not to your liking.
Pros and Cons
Pros
- Excellent combination of comfort and durability.
- Improved control and feedback due to the half-waffle pattern.
- Long-lasting performance from proprietary material.
- Made in the USA with quality manufacturing.
- Affordable price point for a quality grip.
Cons
- May not offer the absolute premium feel of top-tier, more expensive grips.
- Color options might be limited compared to broader ranges.
- Closed-end design may require modification for some handlebar setups (e.g., if bar-end weights are used).
Setup, Compatibility & Care
Setup:
- Remove old grips by cutting them off or using compressed air to release the seal.
- Clean the handlebar thoroughly to remove any residue.
- Apply grip glue (if not using lock-on grips) to the handlebar and the inside of the new grip, or slide the new grips onto the handlebar.
- Ensure the grips are positioned correctly for optimal comfort and control.
- If using grip glue, allow it to cure according to the manufacturer's instructions before riding.
Compatibility:
- These grips are designed for standard 7/8" motorcycle handlebars. Always confirm your handlebar diameter before purchasing.
- The closed-end design is suitable for most applications. If you use handlebar end weights or specific accessories that require an open end, you may need to carefully cut out the end cap.
Care:
- Clean the grips periodically with mild soap and water. Use a soft cloth or sponge.
- Avoid using harsh chemicals or abrasive cleaners, as they can degrade the compound material.
- Ensure grips are dry before riding, especially after cleaning.