Euroshowers Superlux Shower Hose - 50cm - WRAS Approved

The 50cm length is ideal for smaller shower cubicles, straight bath/shower combinations, or when connecting directly to a wall-mounted tap. For larger showers or corner units, longer hoses (e.g., 150cm or 200cm) might be more appropriate.

WRAS (Water Regulations Advisory Scheme) approval signifies that the product has been tested and meets the high standards set by UK water regulations, ensuring it is safe for use with drinking water and prevents contamination.

1/2" BSP is the standard thread size for most domestic shower hoses and shower heads in the UK and Europe. If your current hose or shower head uses a standard connection, this hose will be compatible. The dual nut design helps accommodate slight variations.

Yes, the large 11mm bore is particularly beneficial for power showers, allowing them to operate at their optimal flow rate and pressure.

Wipe gently with a soft, damp cloth. For stubborn marks, a mild soap solution can be used, followed by rinsing and drying thoroughly with a clean cloth. Avoid abrasive cleaners.

Yes, the Euroshowers Superlux shower hose includes two essential washers to ensure a watertight seal at both connection points.

Ensure the washer is correctly seated inside the conical nut. Try tightening the connection slightly further (a quarter-turn with a wrench). If the leak persists, replace the washer or try the other end of the hose.

Check that the hose is not kinked. Ensure the universal connectors are fully seated and not blocked. Verify that the water pressure from your supply unit is adequate. Clean any debris from the shower head and valve outlet.

This is normal for high-quality, double-woven hoses. It indicates the robust construction. Over time, it may become slightly more flexible with use.