Eclipse Power Hacksaw Blade - 16" x 1.1/4" x .062 6tpi - AE352X
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This Eclipse Power Hacksaw Blade (AE352X) is designed for professionals and serious DIYers seeking highly accurate metal cutting performance on powered hacksaw machines. Its key benefit is a strong, rigid construction ensuring straight, precise cuts consistently, even with difficult materials like alloys and stainless steels. A potential caveat is that its specialized nature means it's best suited for powered machines, not manual hacksaws.
All features
| Model Part Number | AE352X |
|---|---|
| Brand | Eclipse |
Extended Product Information
FAQs
What materials can this blade cut?
This blade is designed for cutting a wide variety of metals, including mild steel, alloys, and stainless steels. The 6 TPI is generally suitable for medium to thick sections.
Is this blade suitable for manual hacksaws?
No, this blade is specifically designed for use with powered hacksaw machines. Its rigidity and construction are optimized for the forces and speeds generated by power tools.
How do I know if the blade is installed correctly?
The blade should be securely clamped at both ends, with the teeth pointing in the direction of the cutting stroke (usually downwards). It should be properly tensioned to prevent bowing or breaking.
What does '6 TPI' mean?
TPI stands for Teeth Per Inch. A 6 TPI blade has six teeth per inch, which is a common configuration for general-purpose metal cutting, offering a balance between cutting speed and finish.
How long should this blade last?
Blade lifespan varies greatly depending on the material cut, machine condition, proper usage, and maintenance. However, due to its HSS construction and rigid design, it is expected to offer a long service life under appropriate conditions.
Can I use this blade for cutting plastics or wood?
This blade is specifically engineered for metal cutting. Using it on materials like plastic or wood is not recommended and could lead to poor results, damage to the material, or rapid dulling of the blade.
Troubleshooting
Blade breaks prematurely
Ensure the blade is correctly tensioned in the machine. Check for excessive feed pressure or vibrations. Verify the blade is not dull and is appropriate for the material being cut.
Inaccurate or crooked cuts
Check blade alignment in the machine guides. Ensure the blade is securely clamped and not deflecting. Verify the machine is stable and not vibrating excessively.
Slow cutting speed
Confirm the blade teeth are sharp and suitable for the material. Ensure adequate coolant is being used if applicable. Check for any obstructions or excessive buildup on the blade or workpiece.
Blade overheating
Ensure proper coolant flow or lubrication is applied. Reduce feed rate if necessary. Check that the blade is not dull, as this causes friction.
Pros and Cons
Pros
- Delivers highly accurate and straight cuts due to its rigid construction.
- Excellent durability and longevity thanks to M2 High Speed Steel.
- Capable of cutting through tough materials like stainless steel and alloys.
- Designed for optimal performance in powered hacksaw machines.
- Provides consistent results for demanding metalworking tasks.
Cons
- Primarily designed for powered hacksaw machines; may not be suitable for manual use.
- Specific tooth pitch (6 TPI) may not be optimal for all material thicknesses.
- Requires proper machine maintenance for optimal performance and blade longevity.
- Can be more costly than general-purpose blades due to specialized HSS material.
Setup, Compatibility & Care
Setup:
- Ensure your powered hacksaw machine is properly maintained and set up according to its manual.
- Install the Eclipse AE352X blade securely into the blade clamps, ensuring it is tensioned correctly.
- Verify the blade is aligned straight within the machine's guides.
Compatibility:
- This blade is designed for powered hacksaw machines only.
- It is compatible with machines that accept a 400mm (16-inch) blade length, 32mm (1 1/4 inch) width, and a blade thickness of 1.6mm (0.062 inch).
- The 6 TPI is suitable for a broad range of metal thicknesses, particularly medium to thick sections.
Care:
- After each use, clean the blade and the machine's blade guides to remove metal chips and coolant residue.
- Store blades in a dry place to prevent rust.
- Regularly inspect the blade for signs of wear, such as dull teeth or cracks. Replace the blade immediately if damage is observed to ensure safety and cutting accuracy.