Living and Home Floor Sticker - Geometric - Multicolor
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Living and Home Floor Sticker in the Geometric Multicolor pattern is an ideal solution for DIY enthusiasts and renters looking to refresh their living spaces with a sophisticated, textured look without the commitment of permanent flooring. It offers a quick, adhesive-backed installation that adds immediate depth and visual interest to both residential and commercial interiors, though it is best suited for smooth, level surfaces to ensure long-term durability.
All features
| Colour | Multicolor |
|---|---|
| Pattern | Geometric |
| Model Part Number | 0694162622035 |
| Brand | Living and Home |
Extended Product Information
FAQs
Can I use these on walls?
While intended for flooring, some users apply them as decorative wall accents. Ensure the wall surface is primed and sealed, as heavy adhesive may damage drywall upon removal.
Is this flooring waterproof?
The tiles are water-resistant and can handle minor spills, but they should not be installed in areas with standing water or high humidity.
How do I cut the tiles to fit corners?
Use a sharp utility knife and a metal straight-edge to score the tile, then snap it along the line for a clean finish.
Can I use these over floor heating?
Check your underfloor heating manufacturer specifications regarding heat resistance. Generally, these stickers are not designed for direct exposure to high-heat systems.
How do I remove them?
Heat the tile with a hair dryer to soften the adhesive, then slowly peel from one corner. Remove any residue with a mild adhesive remover.
Can this be used on outdoor patios?
No, this product is designed for interior use only. UV exposure and temperature fluctuations will cause the material and adhesive to degrade prematurely.
Troubleshooting
Edge lifting or peeling
Ensure the subfloor was completely dry and dust-free before application; a small amount of vinyl-safe contact adhesive can be used to re-secure stubborn edges.
Air bubbles trapped under the surface
Use a pin to prick the bubble gently and then press down firmly with a dry cloth to release the trapped air.
Stickers are sliding or not adhering
The floor likely has residual wax or moisture. Clean the area thoroughly with an appropriate degreaser, allow it to dry completely, and reapply a fresh sticker.
Pros and Cons
Pros
- No messy liquid adhesives or grout required
- Sophisticated, textured geometric finish
- Suitable for a wide range of interior styles
- Budget-friendly alternative to hardwood or stone flooring
- Easy to clean and maintain
Cons
- Requires a perfectly smooth and flat subfloor for best results
- Not recommended for high-moisture areas like shower floors
- May be difficult to remove once fully set on certain surfaces
- Not suitable for outdoor or uncovered porch applications
Setup, Compatibility & Care
- Surface Preparation: Ensure the floor is clean, dry, and free of dust, grease, or wax. Any debris left behind will prevent the adhesive from bonding correctly.
- Measurement: Measure your floor area carefully and plan your layout from the center of the room outward to ensure symmetrical edges.
- Application: Peel the protective backing film gradually while pressing the sticker firmly against the surface, smoothing from the center outward to eliminate air bubbles.
- Compatibility: These stickers are best applied to smooth surfaces such as existing vinyl, linoleum, or sealed concrete. Avoid using them on carpets, porous surfaces, or uneven floorboards.
- Maintenance: Clean regularly with a soft mop or a damp cloth using mild, non-abrasive cleaning agents. Avoid using harsh chemicals or industrial floor strippers which can damage the textured finish.