Priory Belt Punch - No.4 - 3mm (1/8In)
Best current price£8.49from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£8.49Visit shop Priory No.4 Belt Punch 3Mm (1/8In) - Grey
Visit shopThe Range£8.49Visit shop All Offers
8 offers from £8.49 - £10.67
View price history by clicking the chart icon.
Priory No 6 Belt Punch 5Mm (3/16In) - GreyFree delivery in 1–3 days£9.30Visit shop →
Priory No.8 Belt Punch 6.5Mm (1/4In) - GreyFree delivery in 1–3 days£9.30Visit shop →
B&Q - No 6 Belt Punch 5mm (3/16In)Free delivery in 1–3 days£10.67Visit shop →
B&Q - No.8 Belt Punch 6.5mm (1/4In)Free delivery in 1–3 days£10.67Visit shop →
OnBuy.comPriory No.8 Belt Punch 6.5Mm (1/4In) 5052587013015
Free delivery in 1–3 days
£10.30
Visit shop
Priory No 6 Belt Punch 5Mm (3/16In) 5055413665488Free delivery in 1–3 days£10.30Visit shop →
Product Information
Full details
The Priory No.4 Belt Punch is an essential tool for leatherworkers, hobbyists, and DIY enthusiasts who require precise 3mm holes in soft materials. Its primary strength lies in its high-quality construction and engineered design that minimizes clogging, making it a reliable choice for consistent work; however, users should note it is strictly designed for soft materials like leather and is not suitable for harder substrates like metal or thick plastics.
All features
| Model Part Number | 1320697 |
|---|---|
| Brand | Priory |
Extended Product Information
FAQs
What is the diameter of the hole this punch creates?
The Priory No.4 punch creates a 3mm (1/8In) diameter hole.
Can I use this on metal belts?
No, this tool is intended exclusively for soft materials like leather and is not designed for metal or rigid materials.
How do I prevent the tool from rusting?
Keep it dry and apply a thin layer of protective tool oil when storing it for long periods.
Do I need a hammer to use this?
Yes, it is designed to be used with a mallet or hammer to drive the punch through the material.
What is the benefit of the milled clearway?
The clearway is an opening in the side of the punch that allows the punched-out waste material to fall out, preventing the punch from getting clogged.
Is this suitable for thick harness leather?
Yes, provided you use a steady surface and a mallet of appropriate weight to penetrate the thickness of the hide.
Troubleshooting
Punch is not cutting through the leather completely
Ensure you are using a soft-faced mallet and strike with sufficient force on a proper backing material like a wood block.
Waste material is getting stuck inside the punch
The milled clearway should prevent this, but if it occurs, use a thin needle or punch wire to gently clear the throat from the side hole.
Holes appear jagged or uneven
Check if the cutting edge has been dulled by improper use; if so, it may need to be lightly touched up by a professional sharpening service.
Pros and Cons
Pros
- High-quality ground steel ensures clean cutting edges
- Milled clearway prevents debris buildup and jamming
- Robust construction offers long-term durability
- Specific 3mm sizing is ideal for common leathercraft needs
Cons
- Limited to use with soft materials only
- Requires a solid work surface or cutting board
- Manual operation requires physical effort for thicker hides
Setup, Compatibility & Care
This punch requires no complex setup but does benefit from proper maintenance to keep the cutting edge sharp. Ensure you are working on a surface that won't dull the tip, such as a specialized cutting board for punching. After use, wipe the tool clean of any residual leather dust or oils. If the punch is stored in a humid environment, apply a light coat of machine oil to the steel to prevent oxidation. This tool is compatible with all standard soft leathers and similar pliable materials; it is not recommended for use on synthetic rubber or dense materials that may cause the metal to deform or lose its edge.