Best current price£11.04from Travis Perkins
Shopping.co.uk recommended and popular offers
Travis Perkins£11.04Visit shop Compression Burst Repair Coupling 15 x 15 x 80mm
Visit shop1 offer from £11.04
View price history by clicking the chart icon.
This Plumbright Compression Burst Repair Coupling is designed for plumbers and DIY enthusiasts needing a quick and reliable fix for hot and cold water systems. Its primary benefit is a heat-free installation using compression fittings, allowing for speedy system builds and repairs. A key consideration is ensuring the fitting is correctly tightened to prevent leaks, as it's a mechanical joint.
| Model Part Number | 953078 |
|---|---|
| Brand | Plumbright |
WRAS (Water Regulations Advisory Scheme) approval means the product has been rigorously tested and meets the Water Supply (Water Fittings) Regulations 1999 in the UK, ensuring it is safe for use with drinking water.
No, this fitting is specifically designed and approved for hot and cold water systems only.
Tighten the nut firmly until resistance is felt, then give it an additional 1/4 to 1/2 turn. Avoid over-tightening, which can damage the pipe or fitting. Refer to manufacturer guidelines if available.
It means that after installation, the fitting can be taken apart and reassembled, which is useful for maintenance or if you need to alter the pipework layout later.
This coupling is designed for standard metric (15mm) pipes. It is not suitable for lead pipes or imperial-sized copper pipes.
The coupling is pressure tested to 16 bar, making it suitable for most domestic and commercial water systems.
Ensure the pipe ends are clean and smooth. Tighten the compression nut further using appropriate tools. Check that the olive has seated correctly.
Ensure the pipe end is not deformed. Gently re-round the pipe if necessary. Avoid excessive force.
Verify the correct pipe size is being used. Ensure the olive is not damaged or misaligned before tightening.
Setup:
Compatibility:
Care:
