Best current price£15.61from B&Q
Shopping.co.uk recommended and popular offers
B&Q£15.61Visit shop B&Q - 5/8" X 18 Unf Male And Female Steel Brake Pipe Fittings For 3/8" Pipe 20 Pack
Visit shop2 offers from £15.61
View price history by clicking the chart icon.
This guide is for mechanics and DIY enthusiasts working on automotive brake systems. The AB Tools Brake Pipe Fittings offer a durable and corrosion-resistant solution for creating secure connections on hydraulic brake lines, though they are specifically designed for 3/16" hydraulic pipe and may not be suitable for other sizes. This 20-pack includes both male and female fittings with a 5/8" x 18 UNF thread, made from strong steel and zinc-plated for longevity.
| Model Part Number | FM012_FM036 |
|---|---|
| Brand | AB Tools |
These fittings are designed to fit 3/16" hydraulic brake pipes.
The thread size is 5/8" x 18 UNF.
These fittings are designed for flexible hydraulic brake pipes (copper or copper-nickel), not for direct connection to rigid steel brake lines which typically use different fitting types.
They are manufactured from steel and are zinc-plated for corrosion resistance.
This pack contains 20 fittings: 10 male and 10 female.
They are suitable for copper and copper-nickel brake pipes, but only those with a 3/16" diameter and requiring a 5/8" x 18 UNF connection.
Yes, you will need a flaring tool capable of creating a 5/8" x 18 UNF flare on the 3/16" brake pipe for proper installation.
Ensure you are using a 3/16" brake pipe and have correctly flared the end with a 5/8" x 18 UNF flaring tool. Check for any burrs or damage on the pipe end or inside the fitting.
The brake pipe may not be correctly flared, or the fitting may not be sufficiently tightened. Re-check the flare integrity and tighten the fitting slightly. Ensure compatibility with the mating part.
The brake pipe may be slightly larger than 3/16" or the flare is not tight. Ensure you are using the correct pipe size and that the flare is properly formed and seated within the fitting.
While zinc-plated, prolonged exposure to harsh chemicals or extreme moisture can cause corrosion. Clean gently and consider applying a protective lubricant suitable for brake components if further protection is needed.
Setup: These fittings are designed to be used with brake pipes that have been correctly flared using a 5/8" x 18 UNF flaring tool to create a double lap flare or similar standard. Ensure the pipe is clean and free of burrs before attempting to fit the connector. Thread the fitting onto the pre-flared pipe, ensuring it starts easily to avoid cross-threading. Tighten securely using appropriate wrenches, but avoid over-tightening which could damage the flare or fitting.
Compatibility: These fittings are specifically compatible with 3/16" diameter hydraulic brake pipes made from copper or copper-nickel alloys. The thread size is 5/8" x 18 UNF. They are designed for use within automotive hydraulic brake systems. Ensure your existing brake system components (e.g., master cylinder, brake calipers, wheel cylinders) have the corresponding 5/8" x 18 UNF male ports or that you are connecting to another 5/8" x 18 UNF male fitting.
Care: Due to the zinc plating, these fittings are protected against corrosion. However, it is advisable to store them in a dry place away from moisture. If they become dirty during installation, clean with a dry cloth. Avoid harsh cleaning chemicals which could damage the plating.
