Best current price£16.24from B&Q
Shopping.co.uk recommended and popular offers
B&Q£16.24Visit shop B&Q - No More Nails Heavy-Duty Mounting Adhesive 234G Tube (3 Pack)Instant GrabSolvent-Free
Visit shop3 offers from £16.24 - £21.35
View price history by clicking the chart icon.
The UniBond No More Nails Heavy-Duty Mounting Adhesive in white is designed for DIY enthusiasts and professionals undertaking interior fixing tasks who need a strong, nail-free solution. Its key benefit is providing instant grab and heavy-duty bonding without the need for drilling, preserving surfaces. A minor caveat is that it is primarily for interior use and works best on rigid building materials.
| Colour | White |
|---|---|
| Brand | UniBond |
No, UniBond No More Nails Heavy-Duty Mounting Adhesive is specifically designed for interior applications only.
Full cure typically takes 24-48 hours, depending on temperature, humidity, and the materials being bonded. The instant grab provides initial hold within seconds.
It is not recommended for polyethylene, polypropylene, PTFE, or porous surfaces like damp plaster or untreated concrete. Always test on a small, inconspicuous area first if unsure.
Coverage varies based on bead size and application. As a general guide, a 234g tube can provide approximately 10-15 metres of a 6mm zig-zag bead.
It is suitable for application on some wallpapered surfaces, provided the wallpaper is well-adhered and the surface is rigid. However, testing on an inconspicuous area first is recommended to avoid potential damage.
Once fully cured, the adhesive itself does not need to be painted as it is off-white. However, it does not typically affect the paintability of the surrounding materials if applied neatly.
Ensure the nozzle is cut and the cartridge is properly loaded into the applicator gun (if applicable). Check if the product has expired.
Verify that surfaces were clean, dry, and free from dust or grease. Ensure sufficient adhesive was applied and items were held in place long enough for the initial grab.
Curing time can be affected by temperature and humidity. Ensure the application area is within the recommended temperature range and allow adequate time for the adhesive to cure fully before applying stress.
While the formula is low odour, some scent is present. Ensure the area is well-ventilated during application and curing if sensitivity is an issue.
Setup:
Compatibility:
Suitable for wood, plaster, brick, concrete, ceramics, metal, and most rigid building materials. Not recommended for polyethylene, polypropylene, PTFE, or porous surfaces like damp plaster or untreated concrete. Always test on an inconspicuous area first if unsure.
Care:
Store unused adhesive in its original packaging in a cool, dry place, away from direct sunlight and frost. Ensure the nozzle is sealed after use. Clean up any excess uncured adhesive immediately with a damp cloth. Cured adhesive may be difficult to remove and may require mechanical means.
