AB Tools Complete Bolt on Brake Shoe Back Plates - 200 x 50mm

No, they are only suitable for Ifor Williams trailers with 200x50mm brakes, manufactured after 1996. They are not compatible with Knott brake systems.

Basic hand tools like wrenches and a screwdriver are typically sufficient. You may also need a jack and jack stands for safely raising the trailer.

Refer to your trailer's manual for specific instructions on brake adjustment. Generally, it involves adjusting the brake adjusters until the shoes lightly contact the drum.

Inspect all components for any damage or incorrect installation. Check the brake cable connections and ensure proper routing. If issues persist, consult a professional mechanic.

Inspect the brakes at regular intervals, such as every 6 months or 6,000 miles, or more frequently if the trailer is used heavily. Pay attention to the wear indicator plugs.

The kit includes fully assembled left and right bolt-on back plates, 200 x 50mm brake shoes, sliding auto reverse levers, brake springs, brake expanders, brake adjusters, Boden cable connectors, back plate shell cable covers, and back plate wear indicator plugs.

The brake size should be listed in your trailer's documentation or can be determined by measuring the brake shoes.

Re-adjust the brakes following the manufacturer's guidelines, ensuring proper clearance between the brake shoes and drum.

Check and adjust the brake cable connections and ensure the brakes on both sides are properly adjusted and functioning correctly. Inspect for any seized components.

Inspect for any seized or damaged components, and ensure the brake cable connections and the overall system is free from obstructions.