Colour Coat Clear Satin Paint - 400ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
Colour Coat Clear Satin Paint is a versatile, high-quality solution designed for DIY enthusiasts and professionals seeking a durable, professional-grade finish on wood, metal, plaster, and masonry. Its primary benefit is a highly pigmented, quick-drying formula that delivers rich coverage with fewer coats while providing a smooth, scratch-resistant surface. While it excels in both indoor and outdoor settings due to its low VOC content, users should note that as a clear coating, its effectiveness depends heavily on the preparation and quality of the underlying base paint or surface material.
All features
| Model Part Number | CCPCC400-S |
|---|---|
| Brand | Colour Coat |
| Container Volume | 400ml |
Extended Product Information
FAQs
Can this be used on outdoor metal?
Yes, Colour Coat is suitable for metal surfaces and provides a protective, scratch-resistant barrier for both indoor and outdoor items.
Does this paint require a primer?
While it has excellent coverage, for best results on bare wood or non-porous materials, a suitable primer is recommended to ensure maximum adhesion.
Is the finish matte or glossy?
This product features a satin finish, which provides a middle-ground sheen that is neither flat nor high-gloss.
How long should I wait between coats?
Due to the quick-drying formula, most projects allow for recoating in as little as 30-60 minutes, depending on ambient temperature and humidity.
Is this safe for indoor use?
Yes, the low VOC design makes it safer for indoor projects like home decor and furniture refurbishment, provided the area is well-ventilated.
How many square meters does one 400ml can cover?
Coverage depends on the porosity of the surface, but a 400ml can typically covers approximately 1.5 to 2 square meters per coat.
Troubleshooting
Paint appears uneven or streaky.
Ensure the surface is properly prepped and sanded; apply thinner coats to prevent pooling or sagging.
Nozzle clogging during application.
Invert the can and press the nozzle for 2-3 seconds to clear the tube, or soak the nozzle in a mild solvent if hardened.
Slow drying time.
Avoid applying in high humidity or extremely cold temperatures; ensure adequate ventilation in the work area.
Pros and Cons
Pros
- Excellent adhesion across multiple surface types
- Quick drying time speeds up project timelines
- Scratch-resistant finish for long-lasting protection
- Low VOC makes it suitable for indoor use
- Requires fewer coats for full coverage
Cons
- Not intended for non-porous plastics without a primer
- Requires proper surface preparation for optimal finish
- Limited to a clear satin aesthetic
- Outdoor durability may vary based on extreme environmental exposure
Setup, Compatibility & Care
Ensure that all surfaces are clean, dry, and free from dust, grease, or loose debris before application. For best adhesion on glossy surfaces, a light sanding may be required to 'key' the surface. Shake the 400ml container thoroughly for at least two minutes before use to ensure the pigments are properly suspended. Apply in a well-ventilated area, keeping the container at least 20-30cm from the surface during application. After use, store the container in a cool, dry place away from direct sunlight. To maintain the spray nozzle, invert the can and spray briefly after each use to clear the valve of residual paint.