SilverStone Technology SST-ECM24-ARGB - M.2 PCIe Adapter
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The SilverStone Technology SST-ECM24-ARGB is an M.2 to PCIe adapter designed for PC enthusiasts seeking to expand their storage capabilities with NVMe SSDs. Its key benefit is enabling a high-speed M.2 NVMe SSD to be installed in a PCIe x4 slot, offering potentially faster data transfer rates and improved cooling. A caveat is that it requires an available PCIe x4 slot and an M.2 NVMe SSD with an M key.
All features
| Model Part Number | SST-ECM24-ARGB |
|---|---|
| Brand | SilverStone Technology |
Extended Product Information
FAQs
Can I use this adapter with a SATA M.2 SSD?
No, this adapter specifically supports M.2 NVMe SSDs with an M key. It is not compatible with M.2 SATA SSDs.
What is the maximum speed I can expect?
The adapter supports PCIe Gen4 speeds, allowing for theoretical maximum speeds of up to 32 GB/s. Actual speeds will depend on your M.2 SSD and motherboard's PCIe generation support (Gen4, Gen3, etc.).
Do I need to install any drivers?
Typically, M.2 NVMe SSDs and PCIe adapters are plug-and-play and do not require specific drivers on modern operating systems like Windows 10/11 or recent Linux kernels. However, it's always a good idea to check your operating system's device manager.
How effective is the heatsink?
The aluminum heatsink with heat trap design is designed to significantly improve M.2 SSD cooling, reducing thermal throttling and maintaining performance during intensive workloads.
Can I use this in a PCIe x1 slot?
While the adapter is physically designed for an x4 interface, it might fit into a PCIe x1 slot. However, performance will be severely limited to PCIe x1 speeds, and it may not function correctly. It is designed for x4 or larger slots.
What does ARGB mean?
ARGB stands for Addressable RGB. It allows for individual control of each LED on the adapter, enabling complex lighting effects through compatible motherboard software.
Is the ARGB cable included?
Yes, the adapter comes with a 4-1 pin ARGB cable for connecting to your motherboard's ARGB header.
Troubleshooting
M.2 SSD not detected after installation
Ensure the M.2 SSD is properly seated in the adapter and secured with the screw. Verify the adapter is fully inserted into the PCIe slot. Check your motherboard's BIOS/UEFI settings to ensure M.2 NVMe drives are enabled and that the correct PCIe slot is configured.
Poor SSD performance or frequent disconnects
Confirm the adapter is installed in a PCIe Gen4 or Gen3 x4 slot for optimal speeds. Ensure the heatsink is properly attached to the M.2 SSD. Check for dust buildup on the heatsink and ensure adequate case airflow.
ARGB lighting not working
Verify that the 4-pin ARGB cable is securely connected to a compatible 5V ARGB header on your motherboard. Ensure your motherboard's RGB software is running and configured to control the connected header.
Adapter physically doesn't fit in PCIe slot
Ensure you are using a compatible PCIe x4 slot. Some motherboards have physically larger slots (x8, x16) that can accommodate an x4 card, but ensure the slot is electrically wired for x4 or more.
Pros and Cons
Pros
- Provides a way to utilize fast M.2 NVMe SSDs in older motherboards with no M.2 slots.
- Active cooling solution with heatsink to prevent SSD throttling.
- ARGB lighting adds aesthetic appeal to PC builds.
- Supports the latest PCIe Gen4 speeds for maximum performance.
- Robust construction ensures longevity.
Cons
- Requires an available PCIe x4 slot.
- Only supports M.2 NVMe SSDs with an M key.
- Adds physical bulk to the PC internals.
- ARGB connection requires a compatible motherboard header.
Setup, Compatibility & Care
Setup:
- Ensure your PC is powered off and unplugged.
- Open your computer case.
- Locate an available PCIe x4 slot on your motherboard.
- Remove the corresponding expansion slot cover(s) on the back of your case.
- Carefully insert the SST-ECM24-ARGB adapter into the PCIe slot until it is fully seated.
- Install your M.2 NVMe SSD (M key) onto the adapter, securing it with the provided screw.
- If desired, connect the 4-pin ARGB cable to a compatible ARGB header on your motherboard for lighting effects.
- Close the PC case and reconnect power.
Compatibility:
- Host Interface: PCIe (Supports PCIe Gen4, backward compatible with Gen3/Gen2/Gen1).
- SSD Interface: M.2 NVMe SSDs with M key.
- Operating System: Compatible with Windows and Linux operating systems (driver installation may be required for some OS versions).
- Motherboard: Requires an available PCIe x4 slot (or larger, e.g., x8, x16).
Care:
- Periodically dust the heatsink and adapter to ensure optimal airflow.
- Avoid exposing the adapter to moisture or extreme temperatures outside its operating range.
- Handle with care to prevent damage to the PCIe connector or M.2 slot.