Best current price£5.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£5.99Visit shop Loops 35 X 152Mm Fully Hardened Wood Drill Bit - Hex Shank - High Performance Woodwork
Visit shop
B&Q£7.69Visit shop - High Performance 35 X 152mm Hardened Wood Drill Bit With Hex Shank For Precision Woodworking
Visit shop4 offers from £5.99 - £7.69
View price history by clicking the chart icon.
The Loops Hardened Wood Drill Bit (35 x 152mm) is designed for professional woodworkers and serious DIY enthusiasts who require clean, precise boring in natural timber and composite wood materials. Its primary benefit is the combination of a robust, fully hardened construction and a secure hex shank that prevents slipping during high-torque applications. Users should note that this specific diameter is best suited for heavy-duty drilling tasks and may require a powerful corded or cordless drill to achieve optimal results without overheating.
| Model Part Number | 35 x 152mm |
|---|---|
| Brand | Loops |
No. This bit is specifically engineered for wood and wood-like materials. Attempting to drill metal will instantly dull the edges and ruin the bit.
While not strictly required, using a small pilot hole can help center the bit more accurately on hardwood surfaces.
Due to the specific geometry of woodworking bits, we recommend professional sharpening services if the edge becomes dull, or replacing the bit to maintain precision.
The total length is 152mm, but effective drilling depth depends on the clearance of wood shavings. We recommend clearing the chips periodically if drilling deeper than 100mm.
While it may physically fit, impact drivers are designed for driving screws, not precision boring. Using it with an impact driver may result in poor hole quality and premature bit wear.
The RPM is too high or the feed rate is too slow. Reduce the drill speed and apply firmer, consistent pressure.
Ensure you are using a backing board under your workpiece. This prevents the wood fibers from tearing out as the bit exits.
Verify that the chuck jaws are clamping onto the flat surfaces of the hex shank and not the edges.
Setup: Ensure your drill chuck is fully tightened over the hex shank before starting. For best results, use a center punch to mark your drill site to keep the bit from walking during the first few seconds of operation.
Compatibility: This bit is compatible with all standard 1/2-inch and 3/8-inch drill chucks thanks to the hex shank design. It is optimized for all wood types, including MDF, plywood, pine, and hardwoods.
Care: Always wipe the bit clean with a dry cloth after use to remove wood dust and resin. If you notice sap buildup, clean the flutes with a solvent-based resin remover. Store the bit inside the provided plastic wallet to prevent rust and edge chipping.
