Best current price£79.99from eBay
Shopping.co.uk recommended and popular offers
eBay£79.99Visit shop Lithium Jump Starter 12V Power Pack LED 500A USB-C PD Maypole MP7441+Airfr
Visit shop2 offers from £79.99
View price history by clicking the chart icon.
The Maypole Power Pack Jump Starter (MP7441) is designed for drivers who need reliable roadside assistance for 12V vehicles. Its primary benefit is safely jumpstarting dead batteries in petrol engines up to 7.0L and diesel engines up to 3.5L, offering up to 35 jumpstarts from a full charge. A potential caveat is the need to ensure the device is adequately charged before use, especially for larger engine types. This portable and lightweight power bank also functions as a versatile device charger and includes an LED flashlight.
| Model Part Number | MP7441 |
|---|---|
| Brand | Maypole |
The Maypole MP7441 can provide approximately 35 jumpstarts from a full charge, depending on battery condition and engine size.
Charging time varies with the power source. Using a USB-C PD30W charger, it can be recharged significantly faster than standard chargers. Specific times depend on the charger's output.
While it can be used in cold weather, battery performance is reduced in low temperatures. It is recommended to store the unit in a warmer place if possible before use in extreme cold for optimal performance.
The smart cable safety technology includes protection against low voltage, reverse polarity, short circuits, overload, over-discharge, and over-temperature.
The large digital screen on the power pack will display the charging status and indicate when the battery is at 100%.
The USB-C port supports PD30W output, which may be sufficient for some laptops. However, compatibility depends on the laptop's charging requirements. It is primarily designed for smaller electronic devices like smartphones and tablets.
Information regarding the specific warranty period is typically found on the product packaging or the manufacturer's official website. Please refer to your purchase documentation.
Ensure the device is charged. Connect to a power source using the USB-C cable and check if the display indicates charging.
Verify that the clamps are securely connected to the correct battery terminals (red to positive, black to negative/ground). Ensure the device has sufficient charge. Check the vehicle's battery condition and fuses.
Check if the device has power. If the battery is low, the flashlight may not function. Recharge the unit.
Ensure the USB cable is properly connected. Try a different USB cable. Confirm that the jump starter unit has sufficient battery charge.
This indicates a safety protection is active. Disconnect the clamps immediately and re-read the connection instructions. Ensure correct polarity and check for any short circuits or low voltage.
Setup: Ensure the power pack is fully charged before first use. Connect the smart jump leads to the power pack, then connect the red clamp to the positive (+) terminal of the dead battery and the black clamp to the negative (-) terminal or a suitable grounding point on the vehicle's chassis. Attempt to start the vehicle. Once started, disconnect the clamps in reverse order (black first, then red).
Compatibility: Suitable for all 12V batteries. Recommended for petrol engines up to 7.0L and diesel engines up to 3.5L.
Care: Store the power pack in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. Recharge the unit regularly (ideally every 3-6 months) to maintain battery health, even if not in use. Clean the exterior with a dry or slightly damp cloth; avoid using solvents or abrasive cleaners. Ensure the jump leads and clamps are kept clean and free from corrosion.
