Vema Tiber Round Shower Head - 250mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Vema Tiber Round Shower Head is designed for homeowners seeking a modern, durable, and stylish upgrade to their bathroom's shower experience. Its large 250mm diameter offers a luxurious rainfall effect, transforming daily showers into a spa-like retreat. While installation is straightforward, it requires a separate shower arm and valve, and optimal performance depends on adequate water pressure.
All features
| Model Part Number | DICM0408 |
|---|---|
| Brand | Vema |
Extended Product Information
FAQs
What is included with the Vema Tiber Round Shower Head?
The product includes the Vema Tiber Round Shower Head (250mm). The shower arm and shower valve are sold separately and are required for installation.
What material is the shower head made from?
The shower head is constructed from high-quality brass and features a durable stainless steel finish.
How is the shower head installed?
It is designed for easy installation onto a standard 1/2 BSP threaded wall or ceiling-mounted shower arm. PTFE tape may be used on threads for a secure seal.
What is the warranty on this product?
The Vema Tiber Round Shower Head comes with a 10-year guarantee on the body and finish, with 3 years on cartridges and 1 year on serviceable parts.
Can I use this shower head with low water pressure?
While it will function, optimal performance, including the rainfall effect, is best achieved with adequate water pressure, ideally 1.0 bar or higher.
How do I clean the shower head?
Use a soft, damp cloth to wipe the surface. Avoid abrasive cleaners. For limescale, a mild solution of vinegar and water can be used periodically, followed by rinsing and drying.
Does this shower head swivel or tilt?
No, the Vema Tiber Round Shower Head is a fixed model and does not swivel or tilt. It is designed to be mounted on a fixed shower arm.
Troubleshooting
Low water flow or weak spray
Check that the water pressure in your home is adequate (minimum 1.0 bar recommended). Ensure no kinks in the shower hose (if applicable) or blockages within the shower arm or valve. Clean any potential debris from the shower head nozzles.
Dripping after shower use
Ensure the shower valve is fully turned off. If dripping persists from the shower head itself, there may be a small internal component issue; contact customer support if within the warranty period.
Corrosion or discoloration on the surface
Wipe the surface with a soft, damp cloth and mild soap. Avoid abrasive cleaners. If damage has occurred due to harsh chemicals, contact Vema customer support regarding warranty options.
Pros and Cons
Pros
- Luxurious rainfall shower experience
- Durable and high-quality stainless steel construction
- Modern, minimalist aesthetic
- Easy to install onto existing shower arms
- Backed by a substantial 10-year guarantee
Cons
- Shower arm and valve sold separately
- Requires adequate water pressure for optimal performance
- Fixed design means limited adjustability
- Larger 250mm size may not fit all shower spaces
Setup, Compatibility & Care
Setup: The Vema Tiber Round Shower Head is designed for easy installation onto a standard 1/2 BSP threaded shower arm (wall or ceiling mounted). Ensure the shower arm is securely fixed before attaching the shower head. Hand-tighten the connection, and use PTFE tape (not included) on the threads for a watertight seal if necessary. Note: A compatible shower arm and shower valve are required and sold separately.
Compatibility: This shower head connects via a 1/2 BSP thread, which is a standard fitting in most plumbing systems. It is compatible with most standard shower valves and shower arms. Performance will vary based on your home's water pressure. We recommend a minimum of 1.0 bar water pressure for optimal flow.
Care: Clean the shower head regularly to maintain its appearance and prevent limescale buildup. Wipe the surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish. For stubborn deposits, a mild solution of vinegar and water can be used, followed by a thorough rinse and polish with a soft cloth.