Best current price£6.39from eBay
Shopping.co.uk recommended and popular offers
eBay£6.39Visit shop 5m 6.35mm Stereo Jack Plug to 3.5mm Stereo Jack Plug Cable Audio Lead
Visit shop
B&Q£7.63Visit shop B&Q - 3.5mm Stereo Jack Plug To 6.35mm Stereo Jack Plug Cable 5M
Visit shop2 offers from £6.39 - £7.63
View price history by clicking the chart icon.
The kenable 5m audio cable is an ideal solution for musicians, sound engineers, and audio enthusiasts looking to bridge the gap between small-format personal audio devices and professional-grade hardware. It provides a reliable, bi-directional connection between 3.5mm stereo jacks and 6.35mm (1/4 inch) balanced inputs, ensuring clean signal transmission for mixers and amplifiers. However, users should note that when connecting to equipment with mono inputs, such as many standard audio mixers, the stereo signal may require specific routing to ensure proper audio output.
| Colour | Black |
|---|---|
| Model Part Number | 01905 |
| Brand | kenable |
Yes, it uses a single coax design which provides inherent shielding to protect the signal during transmission.
This cable is designed for line-level signals. It may not provide enough amplification for a passive microphone without a preamp.
Yes, the 6.35mm end is configured to handle balanced connections, provided the equipment on both ends supports this signal type.
The connectors feature nickel ends for durability and reliable contact.
If your car stereo has a 6.35mm auxiliary input, then yes, this will work perfectly.
Ensure both jacks are fully seated. If the issue persists, verify that the output device is set to 'Stereo' mode in its settings.
Check that the cable is not running parallel to power cables or fluorescent lights, which can cause electromagnetic interference.
Confirm that the 3.5mm source device volume is set to at least 75-80% and that the mixer input gain is properly adjusted for a line-level signal.
Setup is entirely plug-and-play. Simply insert the 3.5mm jack into your source or receiver, and the 6.35mm jack into your target audio device.
Compatibility Note: This cable is designed for stereo signal transmission. If your destination device (such as a standard microphone channel on a mixer) is strictly mono, verify if your hardware supports stereo input via the 6.35mm port. If not, you may experience signal loss or phasing issues.
Care Instructions:
