Maston Car-Rep Auto Spray Paint - Light Grey - 400ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for automotive enthusiasts and DIYers looking to refresh or repair plastic car parts. The key benefit is achieving a professional, silky finish directly on plastic without primer, saving time and effort. A potential caveat is ensuring proper ventilation and surface preparation for optimal results. This 400ml can of Maston Car-Rep Auto Spray Paint in Light Grey offers a convenient solution for automotive projects with its superior resistance and ease of use.
All features
| Colour | Grey |
|---|---|
| Model Part Number | CR01082 |
| Brand | Maston |
| Container Volume | 400ml |
Extended Product Information
FAQs
Do I really need to skip primer with this paint?
Yes, this paint is specifically formulated for direct application onto most plastic surfaces without the need for a separate primer, simplifying your project.
What is the best way to apply this spray paint?
Shake the can well, and apply in several thin, even coats from about 25-30 cm away, allowing adequate drying time between each coat.
How long does it take to dry?
The paint has a fast dry time, allowing for recoating within 10-15 minutes. Full curing time will depend on environmental conditions.
What is the heat resistance of this paint?
This paint can withstand temperatures up to 110°C.
Can I use the entire can of paint?
Yes, the paint has an unlimited pot life, meaning you can use the full contents of the can without it hardening prematurely.
What color is this specific product?
This product is Light Grey.
How do I clean the spray nozzle after use?
After painting, turn the can upside down and spray for a few seconds until only clear propellant comes out. This prevents the nozzle from clogging.
Troubleshooting
Uneven spray pattern or spitting
Shake the can more vigorously. Ensure the nozzle is not clogged; if necessary, clear it by spraying upside down after use or gently cleaning with a solvent (ensure can is depressurized first).
Paint runs or sags
Applied too thickly or from too close. Remove wet paint with a cloth and appropriate solvent, allow to dry, then reapply in thinner, multiple coats from the recommended distance.
Poor adhesion or finish not smooth
Surface was not properly cleaned or prepared. Ensure the plastic surface is free from dirt, grease, and wax. Lightly scuffing the plastic can improve adhesion if recommended for the specific plastic type.
Paint chipping or cracking
This can occur if applied to a flexible surface that was not properly prepped or if the paint was applied in excessively thick coats. Ensure surface is clean and apply thin, even coats.
Pros and Cons
Pros
- Eliminates the need for primer on plastic surfaces.
- Delivers a high-quality, smooth finish.
- Offers strong protective properties against environmental factors.
- Full can usability minimizes waste.
- Quick drying time speeds up projects.
- Suitable for applications requiring moderate heat resistance.
Cons
- Requires good ventilation during application.
- Color match may vary slightly with existing car finishes.
- Surface preparation is still crucial for adhesion and finish quality.
- Potential for overspray if not applied correctly.
- Not suitable for extremely high-heat applications beyond 110°C.
Setup, Compatibility & Care
Setup: Before use, ensure the surface to be painted is clean, dry, and free from grease, oil, and loose material. Shake the can vigorously for at least two minutes after the mixing ball starts to rattle. Test spray on an inconspicuous area first. Apply in thin, even coats from a distance of 25-30 cm. Allow 10-15 minutes between coats. Ensure good ventilation during application and drying.
Compatibility: This spray paint is designed for direct application onto most common automotive plastic surfaces. It is not recommended for use on polystyrene foam or rubber.
Care: Store cans in a cool, dry place away from direct sunlight and sources of ignition. After use, turn the can upside down and spray for a few seconds to clear the nozzle. The paint has a shelf life of 60 months.