Best current price£4.60from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£4.60Visit shop Timco 90175Wmh Welded Masonry Joist Hangers - Galvanised 90 X 175 Unit 1
Visit shop
B&Q£10.70Visit shop B&Q - TimcoWelded Masonry Joist HangersGalvanised (Size 90 X 1751 Each)
Visit shop3 offers from £4.60 - £35.11
View price history by clicking the chart icon.
This guide is for builders and DIY enthusiasts needing to securely support timber joists from brick or block walls. The TIMco Welded Masonry Joist Hanger offers a robust galvanized steel solution for new builds and renovations, ensuring structural integrity. A key consideration is the specific installation method required depending on whether you are building into fresh masonry or retrofitting into existing brickwork.
| Colour | Silver |
|---|---|
| Model Part Number | PTDTIM90175WMH |
| Brand | TIMco |
Masonry joist hangers are designed to provide a secure and reliable method for supporting timber joists from brick or block walls, ensuring structural stability for floors and roofs.
Yes, the pre-galvanised steel offers a high level of corrosion resistance, making them suitable for external walls and other exposed conditions within Service Class 2.
Consider the dimensions of your timber joists and the wall construction. This specific model is 90mm wide with a 175mm height and 80mm bearing, suitable for standard timber sizes and masonry cavity depths.
Eurocode 6 is a European standard for the design of masonry structures. Conformance indicates the product has been designed and tested to meet specific safety and performance requirements for structural applications.
While standard masonry mortar is typically used, ensure it is appropriate for your wall construction and load-bearing requirements. For renovations, mechanical fixings might be considered in some situations, but check local building regulations and manufacturer recommendations.
Building into the wall means inserting the hanger into the mortar joint as the wall is being built. Raking out involves removing existing mortar from a built wall to create space for retrofitting the hanger.
No, these masonry joist hangers are specifically designed for supporting timber joists from masonry walls.
Ensure the hanger is correctly installed with adequate bearing. Check if the joist requires notching or if the hanger is the correct size for the timber. Verify the hanger is not obstructed.
For new builds, ensure sufficient mortar contact and embedment. For renovations, re-check the raked-out area and re-secure with appropriate mortar or fixings. Consult a structural engineer if unsure.
Minor surface rust on the galvanised finish is common. If significant pitting or flaking occurs, particularly in aggressive environments, consider replacing the affected hangers and ensuring future installations use appropriate protection or material for the conditions.
Setup:
Compatibility:
Care:
