Best current price£102.08from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£102.08Visit shop Schneider Electric Ict 63A Dual No Modular Contactor - A9c20862
Visit shop4 offers from £102.08 - £267.39
View price history by clicking the chart icon.
The Schneider Electric Acti9 iCT modular contactor (A9C20862) is designed for electrical professionals managing remote switching of lighting, heating, and ventilation systems. Its key benefit is reliable 63A remote control across AC-7a and AC-7b applications, with a significant caveat being its specific 220-240VAC operating voltage requirement. This 2-pole contactor offers 2 normally open (NO) contacts, is DIN rail mountable, and integrates seamlessly with the Acti9 control ecosystem.
| Series | Acti9 iCT |
|---|---|
| Model Part Number | A9C20862 |
| Brand | Schneider Electric |
It is primarily used for remote control switching of lighting, heating, and ventilation loads in residential, commercial, and industrial settings.
No, this specific model (A9C20862) is designed for a nominal operating voltage of 220-240VAC. Using a different voltage may cause malfunction or damage.
This contactor features two normally open (NO) contacts.
AC-7a refers to the rating for controlling resistive loads (like lighting), allowing a higher current (63A). AC-7b refers to the rating for controlling inductive loads (like small motors), where current is lower (20A) due to inrush current.
It can be used for starting small motors within its AC-7b rating of 20A. For larger motors, dedicated motor contactors are recommended.
It has a width of 36mm, a length of 85mm, and a depth of 68mm (built-in depth of 60mm), designed for standard DIN rail mounting.
Product warranty information is typically provided by the seller at the time of purchase and is subject to Schneider Electric's standard warranty terms.
Verify that the control voltage supplied to the coil (A1, A2) is within the 220-240VAC range and that the supply is live. Check wiring connections for the control circuit.
Ensure the control voltage is stable and within the specified range. Check for any obstructions preventing full contact engagement or coil operation.
Check for a short circuit or damage to the internal contacts. If the issue persists, the contactor may need replacement.
Ensure the load current does not exceed the rated capacity (63A for AC-7a, 20A for AC-7b). Verify adequate ventilation in the enclosure and check wiring for loose connections.
Setup:
Compatibility:
Care:
