Best current price£43.00from Homebase
Shopping.co.uk recommended and popular offers
Homebase£43.00Visit shop Green Treated 2700 x 100 x 100mm Square Top Wooden Fence Post
Visit shop
B&Q£43.44Visit shop - 9Ft Green Treated Square Top Wooden Fence Post 2700mm X 100mm X 100mm (4" X 4")
Visit shop2 offers from £43.00 - £43.44
View price history by clicking the chart icon.
This B&Q Square Top Wooden Fence Post is designed for homeowners and DIY enthusiasts looking to construct sturdy, long-lasting garden boundaries. Its primary benefit is its pressure-treated durability, which protects the timber against rot, decay, and insect damage for a reliable garden structure. A notable caveat to consider is that at 2700mm in length, the post is heavy and requires at least two people for safe handling and installation, especially when setting it into the ground.
| Brand | B&Q |
|---|
Yes, the 2700mm length provides enough flexibility to adjust the height of the fence panels to follow the slope of your garden while keeping the post firmly in the ground.
The post is already pressure-treated. However, if you cut the post, you should apply a suitable timber preservative to the freshly cut surface.
For optimal stability, it is recommended to set these posts at least 600mm into the ground.
These are ideal for 1.8m panels when used with a gravel board or 1.5m panels if using them with trellis features.
Yes, the 100mm x 100mm square profile is substantial enough to hold screws and bolts for brackets, rails, or decorative finials.
Ensure the foundation hole was deep enough and that you used sufficient post-mix concrete to pack the area around the base.
Install a fence post cap to prevent rainwater from soaking into the end grain, which is the most vulnerable part of the timber.
To set the post, dig a hole at least 600mm deep, place the post in the center, and secure it with post-mix concrete. Ensure the post is plumb before the concrete sets.
Compatibility: These posts are designed for 1.5m to 1.8m panel heights. The 100mm x 100mm face is compatible with standard U-brackets and panel clips.
Care: While pressure-treated, it is beneficial to apply a wood preservative to any cut ends to maintain the integrity of the treatment. Periodically check for any signs of surface weathering and apply an outdoor wood stain or oil to preserve the appearance.
