Plumbright Flexi Tap Tails - 1/2 FLEXI
Best current price£4.14from City Plumbing GB
Best offers
Shopping.co.uk recommended and popular offers
City Plumbing GB£4.14Visit shop Plumbright Flexi Tap Tails 1/2" Pair 1/2 1/2 Flexi
Visit shopCity Plumbing GB£4.14Visit shop One Offer
1 offer from £4.14
View price history by clicking the chart icon.
City Plumbing GBPlumbright Flexi Tap Tails 1/2" Pair 1/2 1/2 Flexi
Free delivery in 1–3 days
£4.14
Visit shop
Product Information
Full details
The Plumbright Flexi Tap Tails are essential components for professional plumbers and DIY enthusiasts aiming to connect kitchen or bathroom faucets to water supply lines. Designed for reliability, these tap tails offer the flexibility needed for tight installation spaces, though users should ensure their pipe diameters match the 15mm x 1/2-inch specification before purchasing to avoid compatibility issues.
All features
| Model Part Number | 1/2 FLEXI |
|---|---|
| Brand | Plumbright |
Extended Product Information
FAQs
Are these tap tails suitable for hot and cold water?
Yes, these are designed to withstand standard domestic hot and cold water temperatures.
Do I need plumbers tape with these?
Generally, these tails rely on the compression or rubber seal within the nut, so PTFE tape is often unnecessary if the washers are in good condition.
Can I use these for central heating systems?
No, these are intended for domestic water supply tap connections, not for pressurized heating loops.
What tools do I need for installation?
An adjustable spanner or a pair of open-ended wrenches is sufficient for most installations.
How often should I replace these?
While durable, it is recommended to inspect them every 5 years or whenever the tap is replaced to prevent leaks.
Troubleshooting
Water weeping from the connection point
Ensure the internal rubber washer is correctly seated and tighten the nut an additional quarter turn.
Difficulty reaching the connection
Avoid sharp bends in the hose; if the space is too confined, consider a longer tail or adjusting the angle of the isolation valve.
Pros and Cons
Pros
- Flexible construction simplifies installation in restricted areas
- Standardised dimensions ensure high compatibility with domestic fixtures
- Sturdy build quality reduces risk of premature failure
- Simple, tool-friendly installation process
Cons
- Not suitable for high-pressure industrial plumbing systems
- Requires proper thread sealant or washers to ensure a leak-free seal
- Size is non-adjustable, requiring precise measurement of existing pipes
Setup, Compatibility & Care
To install, ensure the water supply is isolated at the mains. Use a suitable wrench to tighten the 1/2-inch end onto the tap tail and the 15mm end onto the compression fitting. Always verify the condition of existing rubber washers before tightening. For care, perform a visual inspection annually to ensure the braided metal exterior shows no signs of corrosion or bulging. If the tails appear damp or rusted, replace them immediately to prevent water damage.