Best current price£92.07from B&Q
Shopping.co.uk recommended and popular offers
B&Q£92.07Visit shop B&Q - 200mm 8" Rubber Wheel Waste Bin CastorsSwivel & Swivel/brakeSet Of 4
Visit shop5 offers from £92.07 - £111.48
View price history by clicking the chart icon.
This guide is for users needing to add or replace castors on large waste bins or similar heavy-duty equipment. The key benefit is enhanced mobility and ease of movement, even under heavy loads, with a caveat of needing proper mounting to ensure safety. This set includes four 200mm black rubber castors, featuring two swivel and two swivel with brake options. They are constructed with solid rubber wheels and pressed steel centers, designed to offer good floor preservation and low operating noise.
| Model Part Number | EC1586 |
|---|---|
| Brand | Parnells |
Each castor has a load capacity of 200kg, making the total load capacity for the set of four 800kg.
No, the set includes two standard swivel castors for easy maneuverability and two swivel castors that also feature a brake mechanism for securing the item in place.
The wheels are made of solid black rubber with a hardness of 85° Shore A, designed for durability and floor protection.
The top plate measures 135x110mm, with mounting hole centers at 105x80mm and hole sizes of 11mm.
These castors offer good chemical resistance, but they are not suitable for prolonged exposure to oils, which may degrade the rubber.
The overall height from the bottom of the wheel to the top of the mounting plate is 238mm.
No, mounting bolts and associated hardware are not included and must be sourced separately to match the specific mounting requirements.
Check for debris lodged in the swivel mechanism or wheel. Clean thoroughly. If the issue persists, check the top plate mounting and ensure it is not causing undue stress on the swivel.
Inspect the brake mechanism for obstructions or damage. Ensure the brake lever is fully engaged. Tighten any loose components of the brake linkage.
Verify that the roller bearing is properly seated and that the wheel is securely attached to its axle. Check that the mounting bolts for the castor are fully tightened.
Ensure all four castors are installed correctly and that the load is evenly distributed. Check that the total weight does not exceed the set's capacity of 800kg. Inspect for any cracks or damage to the castors or mounting points.
Setup:
Compatibility:
These castors are designed for use on equipment with a flat mounting surface and can accommodate a total load of up to 800kg for the set. The mounting hole centers are 105x80mm, and the hole size is 11mm. Ensure your equipment's base can support these dimensions and the required load.
Care:
