Please Note - Some of these tins have some surface rust caused by warehouse condensation. The pain...Please Note - Some of these tins have some surface rust caused by warehouse condensation. The paint is unaffected.
Rust-Oleum Colour Wash Translucent Coloured Wood Stain 750ml Pearl Pink Matt
Overview
Can also be used for everyday projects - Typical applications include painting of furniture, cabinets, doors, frames, vases, baskets, trim and general bric-a-brac.Rust-Oleum Colour Wash Translucent Coloured Wood Stain 750ml Matt.Available in four shades.The trendy, pearlescent coloured stain lightly tints wood, enhancing its natural beauty.No need to wax or lacquer the finished paint work.Add beautiful, yet subtle, translucent colour to bare or unpainted wood.
Key Points
A subtle translucent colour wash for wood.For use on bare wood.Exceptional coverage in one coat.Colour Wash provides a great way of personalising wooden objects while allowing the wood grain to show through.For interior use.750ml tin size.
This guide is for anyone looking to add a subtle, translucent color to bare or unpainted wood using Rust-Oleum Colour Wash. It's ideal for personalizing wooden objects while allowing the wood grain to show through. A key benefit is the exceptional coverage in one coat, saving you time and effort. Note that this product is for interior use only.
All features
Colour
Pink
Brand
Rust-Oleum
Extended Product Information
FAQs
Can I use this on previously painted wood?
No, this product is designed for use on bare or unpainted wood only. You will need to remove the existing paint before applying this stain.
How many coats are needed?
The product provides exceptional coverage in one coat, but you can apply multiple coats to achieve a deeper color if desired.
Is it suitable for outdoor use?
No, this product is for interior use only.
Do I need to apply a topcoat?
No, waxing or lacquering is not required after applying this stain.
How do I clean the application tools?
Clean brushes and cloths immediately after use with mineral spirits or paint thinner, following the manufacturer's instructions.
What kind of wood is this stain best for?
This stain can be used on a variety of wood types, but always test in an inconspicuous area first to ensure you achieve the desired color.
What if I accidentally get the stain on a surface I don't want to stain?
Wipe up any spills immediately with a clean cloth. The stain may be difficult to remove once it has dried.
Troubleshooting
Uneven color or streaks after application.
Ensure the stain is mixed well before application and apply in even coats. If streaks appear, lightly sand the area after the stain is dry and reapply.
Stain not adhering properly to the wood.
Make sure the wood surface is completely clean, dry, and free of any existing finishes. Lightly sand the surface if necessary.
Color is too dark or too light.
The final color will depend on the wood type and the number of coats applied. Always test in an inconspicuous area first. For a lighter color, apply a thinner coat or sand the surface after it has dried.
Pros and Cons
Pros
Easy to apply with one-coat coverage.
Enhances the natural beauty of wood.
Provides a subtle, translucent color.
Versatile use on various wooden objects.
No need for waxing or lacquering.
Cons
Only for interior use.
Color is translucent, so the underlying wood grain is visible and may influence the final color.
Limited to four available shades.
Setup, Compatibility & Care
Preparation: Ensure the wooden surface is clean, dry, and free from any previous finishes, dirt, or grease. Lightly sand the wood if necessary to create a smooth surface.
Application: Apply the stain evenly with a brush or cloth in the direction of the wood grain. Avoid applying too much product at once to prevent runs or drips.
Drying: Allow the stain to dry completely. Drying times can vary depending on environmental conditions (typically a few hours). Refer to the product label for specific drying times.
Compatibility: This stain is specifically designed for bare or unpainted wood. It may not adhere well to surfaces with existing finishes.
Care: Once dry, the stained surface can be gently wiped with a damp cloth for cleaning. Avoid using harsh chemicals or abrasive cleaners.