Best current price£13.50from eBay
Shopping.co.uk recommended and popular offers
eBay£13.50Visit shop ADPRAIN500M937 0.5L Purple Rain 3.0 Fallout Remover 500ml Spray Gel By Autobrite
Visit shop6 offers from £13.50 - £95.92
View price history by clicking the chart icon.
The Autobrite Purple Rain 3.0 is an intensive, pH-balanced fallout remover for vehicle exteriors, ideal for detailing enthusiasts seeking to eliminate iron contaminants from paintwork and wheels. Its key benefit is its effective breakdown of bonded contaminants, signaled by a color change from pink to purple/red. A key caveat is avoiding use on bare aluminum and ensuring the product does not dry on surfaces.
| Model Part Number | ADRAIN500M937 |
|---|---|
| Brand | Autobrite |
It is an intensive fallout remover designed to break down and remove iron contaminants, such as brake dust and industrial fallout, from your vehicle's exterior surfaces like paintwork and wheels.
The product has a color-changing indicator. It starts as pink and turns purple or red as it reacts with iron contaminants, visually showing you where it's actively cleaning.
It is safe for most exterior surfaces including paint, glass, clear coated alloy wheels, stainless steel, plastic, and rubber. However, it is not suitable for bare aluminum.
No, Purple Rain 3.0 is not recommended for bare or polished aluminum surfaces as it can cause damage or discoloration.
Allow it to dwell for a few minutes until you see the color change. Crucially, do not let the product dry on the surface. Rinse thoroughly with water.
If the product dries on the surface, it may cause staining. Always ensure adequate rinsing and avoid use in direct sunlight or extreme heat.
It's best to avoid using the product in extreme temperatures, both hot and cold. Apply when surfaces are cool and the ambient temperature is moderate for optimal performance and to prevent drying issues.
Purple Rain 3.0 is specifically formulated to chemically break down iron-based contaminants. While it cleans wheels, its primary function is fallout removal, which is often more stubborn than typical road grime.
This may indicate a lack of iron contaminants or that the product is not being applied to a suitable surface. Ensure you are applying to a surface known to accumulate fallout, and try again. Test on a small, inconspicuous area first.
This usually occurs if the product was allowed to dry on the surface. Ensure thorough rinsing and avoid use in direct sunlight or high temperatures. If staining persists, a gentle clay bar or polish may be required.
Ensure the product is applied generously and allowed adequate dwell time. For very stubborn contamination, a second application might be necessary, or the use of a soft detailing brush during dwell time.
The product is safe for clear coated alloy wheels, but not for bare aluminum. Double-check the wheel finish. If unsure, test on a small, hidden area first.
Setup: No assembly required. The product is ready to use directly from the bottle. Ensure you have a hose or pressure washer ready for rinsing.
Compatibility: Safe for use on:
*Not suitable for bare aluminum.*
Care:
