AB Tools Anm Oxy Acetylene Gas Cutting Nozzle Tip Standard Length 3/64" 5-12mm 2Pk

This nozzle is optimized for cutting steel plate thicknesses ranging from 5mm to 12mm.

This nozzle is specifically designed for optimal performance with acetylene gas due to its high velocity and characteristics. While it might function with other gases, performance may be compromised and is not recommended.

After the nozzle has cooled completely, use a specialized nozzle cleaning tool or a soft wire brush to gently clear any debris or slag from the orifice. Avoid using abrasive materials that could damage the nozzle.

It means the nozzle is manufactured as a single, solid component rather than being assembled from multiple parts. This typically leads to increased durability and reduced risk of leaks or internal component failure.

This product comes as a pack of 2 nozzles.

The nozzle size is 3/64 inches.

It is designed for standard oxy-acetylene cutting torches. Always ensure compatibility with your specific torch model before installation.

Check and adjust oxygen and acetylene pressures. Ensure the nozzle is clean and free from debris. Verify the nozzle size is appropriate for the material thickness.

Ensure proper gas mixing by checking torch setup and nozzle seating. Reduce gas flow rates if they are too high for the material thickness. Check for leaks in the gas lines or torch.

Ensure you are using the correct nozzle for your torch head. Check for any foreign material or damage on the threads of both the nozzle and the torch head. Do not force the nozzle; it should screw on smoothly.

Adjust torch angle and travel speed. Ensure sufficient preheat flame and proper oxygen stream. Clean the nozzle orifice and check gas pressures.