Castrol POWER1 4T Motorcycle Engine Oil - 4 Litres - 10W-30

Castrol POWER1 4T 10W-30 Semi Synthetic 4 Stroke Motorcycle Engine Oil 4 Litres. Experience the cu...

Best current price£12.25from Demon Tweeks

All Offers

14 offers from £12.25 - £60.14

View price history by clicking the chart icon.

Demon TweeksCastrol Power 1 4T 10W-30 Motorcycle Engine Oil - 1 x 1 Litre
£7.94 delivery
£12.25
Visit shop
eBay1 x 1 Litre - Castrol Power 1 4T Semi Synthetic 10W30 Motorbike Engine Oil
Free delivery in 1–3 days
£15.99
Visit shop
OnBuy.comCastrol Power1 4T 10W-30 Motorcycle Oil 4L 4008177188763
Free delivery in 1–3 days
£60.14
Visit shop

Product Information

Full details

This guide is for motorcycle enthusiasts seeking optimal engine performance. Castrol POWER1 4T 10W-30 Semi Synthetic Engine Oil enhances your bike's acceleration with its Power Release Technology. Note that the specific benefits are optimized for four-stroke engines.

All features

Model Part Number15F565
BrandCastrol

Extended Product Information

FAQs

What type of engine is this oil for?

Castrol POWER1 4T 10W-30 is designed for four-stroke motorcycle engines.

What is Power Release Technology?

Power Release Technology minimizes friction, allowing for faster acceleration.

Can I use this oil in my car?

No, this oil is specifically formulated for motorcycles and may not be suitable for cars.

How often should I change the oil?

Refer to your motorcycle's owner's manual for recommended oil change intervals. Typically, oil changes are recommended every 3,000 to 6,000 miles or as specified by your motorcycle manufacturer.

What does 10W-30 mean?

10W-30 refers to the oil's viscosity grade. The '10W' indicates the oil's viscosity at cold temperatures, and '30' indicates the viscosity at operating temperatures.

Is this oil fully synthetic?

No, this oil is semi-synthetic, providing a blend of synthetic and mineral oil benefits.

Where can I dispose of used oil?

Used oil should be disposed of at a local recycling center or an auto parts store that accepts used oil for recycling.

Can I mix this oil with other brands?

While it's generally safe to mix oils, it's best to stick with the same brand and type for optimal performance. Mixing oils can sometimes diminish their effectiveness.

Troubleshooting

Engine performance has decreased after an oil change.

Check the oil level and ensure you used the correct oil viscosity (10W-30). Also, verify the oil filter is correctly installed and not blocked.

Engine is making excessive noise.

Check for oil leaks. If the oil level is low, top it up. If noise persists, consult a mechanic, as it may indicate an internal engine issue.

Difficulty shifting gears.

Ensure you have used the correct oil type. Check your clutch cable and adjust if necessary. Consider a clutch adjustment if shifting problems continue.

Pros and Cons

Pros

  • Improved acceleration due to reduced friction.
  • Enhanced engine protection for longevity.
  • Designed for high-performance four-stroke engines.
  • Good performance across different riding conditions.
  • Semi-synthetic formula offers a balance of performance and value.

Cons

  • Not suitable for all engine types; only for 4-stroke engines.
  • May not provide significant benefits in older engine designs.
  • Performance gains may vary depending on the motorcycle and riding conditions.
  • Requires regular oil changes for optimal performance.
  • Semi-synthetic may not offer the same level of protection as fully synthetic oils in extreme conditions.

Setup, Compatibility & Care

  1. Compatibility: This oil is specifically designed for four-stroke motorcycle engines. Ensure your motorcycle's manual recommends a 10W-30 oil viscosity.
  2. Oil Change Procedure:
  • Warm up the engine.
  • Place the motorcycle on a level surface.
  • Locate the oil drain plug and oil filter.
  • Position a drain pan under the drain plug.
  • Remove the drain plug to allow the old oil to drain completely.
  • Replace the drain plug, ensuring it is properly tightened.
  • Remove the old oil filter and install a new one.
  • Locate the oil fill cap.
  • Pour in the correct amount of Castrol POWER1 4T 10W-30 oil, as specified in your motorcycle's manual.
  • Check the oil level using the dipstick.
  1. Care: Store the oil in a cool, dry place. Dispose of used oil properly at a recycling center.

Price History

DatePrice
Visit shop