Best current price£49.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£49.99Visit shop B&Q - Teak Oil Step 3 Uv Protective Wood Oil For BoatsOutdoor Furniture & Garden Timber 1L
Visit shop1 offer from £49.99
View price history by clicking the chart icon.
This guide is for boat owners and individuals seeking to protect and enhance their teak wood surfaces. The Starbrite Teak Oil - Step 3 provides a long-lasting UV protection and a rich, warm finish, preventing common issues like drying and cracking. However, it requires proper surface preparation for optimal results.
| Model Part Number | 85132 |
|---|---|
| Brand | Star Brite |
Reapplication frequency depends on the level of exposure to sun and weather. Generally, reapplication is recommended every 3-6 months, or when the wood begins to look dull or dry.
No, this product is designed for bare or previously oiled teak and other hardwood surfaces. It will not adhere properly to painted surfaces.
Step 1 is typically a cleaner, Step 2 is a brightener, and Step 3 is the protective oil finish. Using all steps in sequence provides the best results for restoring and protecting teak.
While the oil helps protect the wood, it does not contain specific mildewcides. Regular cleaning and proper application will help maintain wood health.
Drying time can vary based on temperature and humidity. Typically, excess oil should be wiped off within 10-20 minutes, and the surface can be dry to the touch within a few hours, with full curing taking longer.
Yes, it will enhance the natural color of the teak, providing a rich, warm, golden-brown hue. It will deepen the existing color rather than drastically altering it.
Ensure the surface was properly cleaned and sanded before application. Apply oil evenly and wipe off excess thoroughly. Multiple thin coats may be better than one heavy coat.
The wood may be sealed or have an existing finish. Ensure the surface is properly prepped (sanded) to open the grain. For very dense wood, a second application may be needed.
Too much excess oil was left on the surface and did not fully dry. Wipe down the surface with a clean cloth dampened with a small amount of mineral spirits to remove sticky residue.
Preparation: For optimal results, ensure the teak surface is clean, dry, and free of dirt, grease, and old finishes. Lightly sand the wood if necessary to open the grain. Always test the oil on an inconspicuous area first.
Application: Apply the oil liberally with a clean cloth or brush, working in the direction of the wood grain. Allow the oil to penetrate for 10-20 minutes, then wipe off any excess that has not been absorbed. For a deeper finish, multiple coats can be applied after the previous coat has dried.
Compatibility: This product is specifically formulated for teak and other hard tropical woods. It is compatible with most marine and outdoor wood finishes, but always perform a spot test.
Care: Reapply as needed, typically every few months or after significant exposure to the elements. Clean surfaces with mild soap and water; avoid harsh detergents.
