Lighting Collection Pair of Rechargeable Table Lamp with Crystal Effect - Gold

A full charge typically provides several hours of illumination, varying depending on the brightness and color temperature settings used. For continuous use at moderate brightness, expect approximately 6-8 hours. For dimmer settings, it can last longer.

The lamps offer three selectable color temperatures: 2700K (warm white), 4000K (cool white), and 6000K (daylight).

No, the LED is integrated into the lamp and is not designed to be user-replaceable. It is an energy-efficient, long-lasting light source.

Please refer to the product packaging or retailer's information for specific warranty details, as warranty periods can vary by region and seller.

While portable and rechargeable, these lamps are designed for indoor use. They are not weatherproof and should be protected from rain, direct sunlight for extended periods, and extreme temperatures when used outdoors for events.

You can adjust the settings using the simple touch controls located on the base or stem of the lamp. Typically, a short touch cycles through color temperatures, and a long press adjusts brightness (dimming).

Ensure the lamp is fully charged. Connect it to a known working USB power source and allow it to charge for at least 30 minutes before attempting to turn it on again. Check that the touch control area is clean and dry.

The battery may be low. Recharge the lamp fully. If the issue persists after a full charge, the integrated LED may be nearing the end of its lifespan, although this is unlikely for a new product.

Ensure the touch sensor area is clean and free from moisture or debris. Try turning the lamp off (if possible via a long press) and then on again. If the issue continues, try a full recharge cycle.

Try a different USB cable and a different USB power source to rule out issues with the cable or power supply. Ensure the USB port on the lamp is clean.