Polycell Damp Seal Paint has been specially formulated to seal patches of penetrating damp on inte...Polycell Damp Seal Paint has been specially formulated to seal patches of penetrating damp on interior walls and ceilings in just one coat, preventing them from showing through and spoiling decorations. Prevents damp from showing through and spoiling decoration. Seals patches of penetrating damp on interior walls and ceilings in just one coat. Polycell One Coat Damp Seal is a specially formulated solution for sealing patches of penetrating damp on interior walls and ceilings. Its unique formula requires only one coat to effectively block damp, preventing it from showing through your chosen decorations. The matt white finish is ready for painting or wallpapering. Features: Seals patches of damp & prevents them from reappearing Can be applied to damp surfaces For a longer lasting paint finish One Coat Application Saves time and effort Specifications: Dimensions: H:12.0 x W:10.0 x D:10.0 cm Weight: 1.5 kg Colour: White Material: Paint Model Number: 5093043 Polycell One Coat Damp seal is formulated to seal patches of penetrating damp on interior walls and ceilings in just one coat, preventing it from showing through and spoiling the look of your room. WARNING Flammable and Irritant. Keep out of reach of children. Always read instructions.
Polycell Damp Seal Paint 500ml PLCDS500Free delivery in 1–3 days£24.62Visit shop →
Product Information
Full details
This guide is for anyone dealing with penetrating damp on interior walls and ceilings. Polycell One Coat Damp Seal offers a simple, one-coat solution to seal these damp patches, preventing them from ruining your decorations. However, it's important to remember that this product is not a cure for the source of the damp, which should be addressed separately.
All features
Colour
White
Model Part Number
5093043
Brand
Polycell
Extended Product Information
FAQs
How long does it take to dry?
The product typically dries in approximately 4 hours under normal conditions.
Can I apply this to rising damp?
No, this product is not suitable for use against rising damp. You should address the source of the damp first.
Can I apply it to exterior walls?
No, this product is designed for interior use only.
Do I need to sand the surface before applying?
Yes, ensure the surface is clean, dry, and free from loose particles and mould. Fill holes or cracks and sand down well.
What kind of finish does it have?
It has a matt white finish, which is ready for painting or wallpapering.
How many coats do I need?
It requires only one coat to effectively seal the damp.
Can I apply directly to the damp surface?
Yes, it can be applied to damp, but not saturated, surfaces.
Troubleshooting
Damp patches reappearing after application.
Ensure the source of the damp is addressed. The product seals, but doesn't fix the underlying cause. Check for leaks or condensation issues and resolve them.
Paint or wallpaper not adhering properly.
Ensure the surface is completely dry before applying decorations. Ensure proper surface preparation. Test for compatibility.
Product is thick and difficult to apply.
Make sure you stirred the product well. Do not thin the product.
Pros and Cons
Pros
Easy to apply with a brush or roller.
Quick drying time allows for faster project completion.
Provides a surface ready for painting or wallpapering.
Effective at preventing damp patches from reappearing.
Saves time and effort with a one-coat application.
Cons
Not a cure for the source of damp.
Not suitable for use at ground level.
Not suitable for areas with rising damp.
Drying of wall coverings may be slowed.
Requires proper surface preparation for best results.
Setup, Compatibility & Care
Surface Preparation: Ensure the surface is clean, dry, and free from loose particles and mould. Remove any loose paint or wallpaper.
Application: Stir the product well before use. Apply generously with a brush or roller, working well over the affected area and a wide surrounding area.
Drying Time: Allow the product to dry fully (approximately 4 hours under normal conditions) before applying a second coat or decorating.
Recoating: Wait 24 hours before applying the topcoat.
Compatibility: Compatible with most interior paints and wallpapers. Always test a small, inconspicuous area first to ensure compatibility.
Storage: Store in a cool, dry place. Protect from frost and extreme temperatures. Do not use or store in extremes of temperature.