Gunpla HG Gundam Decal - GD-30
Best current price£8.99from eBay
Best offers
Shopping.co.uk recommended and popular offers
eBay£8.99Visit shop Bandai Gundam Decal No.30 HGUC 1/144 Earth Federation Forces MS 1
Visit shopeBay£8.99Visit shop One Offer
1 offer from £8.99
View price history by clicking the chart icon.
eBayBandai Gundam Decal No.30 HGUC 1/144 Earth Federation Forces MS 1
Free delivery in 1–3 days
£8.99
Visit shop
Product Information
Full details
This guide is for Gunpla builders of all skill levels looking to enhance their models with detailed decals. The Gunpla HG Gundam Decal - GD-30 provides high-quality water slide decals specifically designed for 1/144 scale HGUC Zeon mobile suits, adding realism and visual flair. Note that proper application requires some experience with water slide decals.
All features
| Model Part Number | GD-30 |
|---|---|
| Brand | Gunpla |
Extended Product Information
FAQs
What scale are these decals for?
These decals are designed for 1/144 scale Gunpla models.
What type of decals are these?
These are water slide decals.
What is the best way to cut out the decals?
Use a hobby knife or small scissors to carefully cut around the edges of the decal.
What is decal setting solution?
Decal setting solution helps the decals adhere to the surface and conform to curves.
Can I reuse a decal?
No, decals are designed for one-time use.
How do I remove a decal if I make a mistake?
Carefully lift the edge of the decal with a hobby knife and re-apply a new decal.
How long should I let the decals dry?
Allow the decals to dry completely, typically for several hours or overnight.
Troubleshooting
Decal won't slide off the backing paper.
Soak the decal in water for a longer period. Ensure the water is at room temperature.
Decal tears during application.
Use a sharp hobby knife or scissors to carefully cut the decal. Handle with care and use decal setting solution.
Decal has air bubbles or wrinkles.
Use a soft cloth or cotton swab to gently press out air bubbles and smooth out wrinkles.
Pros and Cons
Pros
- Adds significant detail and realism to Gunpla models.
- Specifically designed for HGUC Zeon mobile suits.
- Water slide decals offer a seamless finish.
- High-quality product from Bandai.
- Enhances the visual appeal of your models.
Cons
- Requires some skill and practice to apply correctly.
- Small decals can be delicate and prone to tearing.
- Application process can be time-consuming.
- Misalignment can be difficult to correct.
Setup, Compatibility & Care
- Preparation: Gather your Gunpla model, the decal sheet, water, a hobby knife or scissors, a soft cloth or cotton swabs, and decal setting solution (optional).
- Cutting: Carefully cut out the desired decal from the sheet, as close to the edge of the design as possible.
- Soaking: Place the decal in a bowl of room-temperature water for approximately 10-20 seconds, or until the decal can be easily slid off the backing paper.
- Placement: Gently slide the decal off the backing paper and position it on your Gunpla model.
- Adjustment: Use a soft cloth or cotton swab to remove excess water and adjust the decal's position.
- Setting (Optional): Apply decal setting solution to help the decal adhere to the surface and conform to any curves or details.
- Drying: Allow the decals to dry completely before handling the model.
*Compatibility*: This decal sheet is specifically designed for 1/144 scale HGUC Zeon mobile suits.
*Care*: Handle the decals with care during application. Avoid touching the adhesive side of the decal. Store the decal sheet in a cool, dry place when not in use.