Best current price£6.92from Rapid Online - Rapid Electronics Ltd.
Shopping.co.uk recommended and popular offers
Rapid Online - Rapid Electronics Ltd.£6.92Visit shop Finder 40.51.8.230.0000 PCB Relay 230V AC 12A VDE 0106/T101 compliant
Visit shop7 offers from £6.92 - £23.21
View price history by clicking the chart icon.
1 offer from £8.71
View price history by clicking the chart icon.
This Finder PCB Mount Power Relay Module is designed for engineers and hobbyists working with industrial and consumer electronics who need a reliable switching component. Its key benefit is enabling control of higher voltage/current circuits using a low-voltage signal. A potential caveat is that it requires careful consideration of the 230V AC coil voltage and appropriate safety measures during installation. This module features a 230V AC coil, a 16A switching current, and a Single Pole Double Throw (SPDT) contact configuration, making it versatile for various applications.
| Model Part Number | 406182304000 |
|---|---|
| Brand | Finder |
The coil voltage for this Finder module is 230V AC, suitable for operation at 50Hz or 60Hz.
This relay module is rated for a maximum switching current of 16A.
SPDT stands for Single Pole Double Throw. It means the relay has one set of contacts that can switch between two different circuits – one normally closed (NC) and one normally open (NO).
This relay is designed for AC loads and AC control voltage. While it might switch DC loads, its performance and lifespan could be significantly affected due to different arcing characteristics. It's recommended to use relays specifically designed for DC switching.
The degree of protection is IP20, which means it is protected against solid objects larger than 12.5mm (like fingers) but offers no protection against water.
No, this is a mono-stable (non-latching) relay. It will only remain in its energized state as long as the 230V AC control signal is applied to the coil.
The relay has compact dimensions with a width of 12.4mm, a height of 25mm, and a depth of 29mm.
Verify the control signal voltage is a stable 230V AC and is correctly connected to the coil terminals (A1, A2). Check for any breaks in the control wiring. Ensure the coil is not faulty.
Check if the control signal is continuously applied or removed as expected. Ensure no external factors are physically impeding the relay's armature movement. If the relay is physically damaged, it may need replacement.
Ensure the switched current does not exceed the 16A rating. Arcing due to switching inductive loads can cause contact damage. For such loads, consider using a snubber circuit or a relay with higher contact ratings. Inspect contacts for damage or wear; replacement may be necessary.
Confirm the switched load current is within the 16A limit. Ensure adequate ventilation around the relay on the PCB. If the relay is continuously switching high currents, it may be operating beyond its rated duty cycle or require heatsinking if applicable.
Setup:
Compatibility:
Care:
