UGREEN USB-C Hub - 7-in-1 - 4K HDMI, 100W PD

No, the USB-C Power Delivery (PD) port on this hub is exclusively for charging your host device (laptop, tablet, etc.) and powering the hub itself. It does not support data transfer.

The HDMI port supports up to 4K resolution at 30Hz. It also supports 2560*1440p at 60Hz and 1920*1080p at 120Hz.

Yes, the hub features a 100W USB-C Power Delivery port that allows you to charge your connected host device. Ensure you connect a compatible USB-C PD charger to this port. Note that up to 95W is delivered to the host, and 5W is used by the hub.

Yes, the hub allows for simultaneous reading and writing of data from both the SD and Micro SD card slots.

The integrated SD and Micro SD card reader supports memory cards with capacities up to 2TB.

Generally, the hub is plug-and-play. However, for the Gigabit Ethernet port, drivers might be required for older versions of Windows or Linux. You can usually find these on the UGREEN support website.

The hub is compatible with most modern devices featuring a USB-C port that supports Power Delivery and DisplayPort Alternate Mode, including MacBooks, iPads, Galaxy Tabs, and various Windows laptops like Dell XPS, Lenovo Yoga, and HP Spectre.

Ensure your host device's USB-C port supports DisplayPort Alt Mode. Verify the HDMI cable is securely connected at both ends. Try a different HDMI cable or display. Ensure the connected display is set to the correct input source.

Check the Ethernet cable connection at both the hub and the router/switch. For older Windows or Linux systems, ensure the latest Ethernet drivers are installed from the UGREEN website. Restart your computer and network equipment.

Disconnect and reconnect the USB device. Ensure the total power consumption of all connected USB devices does not exceed 10W (5V/2A). Try connecting the devices to different USB 3.0 ports on the hub or directly to the host device.

Confirm you are using a USB-C PD charger with sufficient wattage (at least 65W recommended for optimal performance) connected to the hub's USB-C PD port. Ensure the charger is plugged into a working power outlet. Note: The USB-C PD port on the hub is for charging the host device only and does not support data transfer.

Ensure the card is properly inserted into the correct slot. Try re-inserting the card. Test the card with a different reader or directly on another device to rule out a card issue. Format the card if necessary (backup data first).