Maxicolor is a fast-drying decorative spray paint for use on wood, metal and plastic. It offers ex...Maxicolor is a fast-drying decorative spray paint for use on wood, metal and plastic. It offers excellent coverage and adhesion with minimal drips. Suitable for use indoors or outdoors. Available in a wide range of RAL colours.
Best current price£3.74from Blueperry agriculture (UK)
This guide is for anyone using MAXICOLOR Spray Paint (White, RAL 9016) for decorative projects on wood, metal, or plastic. It provides excellent coverage and adhesion with minimal drips. Keep in mind that while it's suitable for indoor and outdoor use, proper ventilation is essential during application.
All features
Colour
White
Model Part Number
Mxcmx9016
Brand
MAXICOLOR
Extended Product Information
FAQs
What surfaces can I use MAXICOLOR Spray Paint on?
MAXICOLOR Spray Paint can be used on wood, metal, and plastic surfaces.
How long does it take for the paint to dry?
The paint dries quickly; however, drying times can vary. Refer to the product label for specific dry times.
Do I need to prime the surface before painting?
Priming is recommended for optimal adhesion, especially on metal and plastic surfaces. It also helps to ensure a uniform finish and improves the paint's durability.
How should I store the spray paint?
Store the spray paint in a cool, dry place away from direct sunlight and heat.
Can I use this paint indoors?
Yes, MAXICOLOR Spray Paint is suitable for indoor use. However, always ensure adequate ventilation when spraying indoors.
How do I clean the nozzle if it gets clogged?
Remove the nozzle and soak it in paint thinner or acetone. You can also try using a needle to clear any blockages. After cleaning, rinse and reattach to the can.
Is this paint weather-resistant?
Yes, it is suitable for outdoor use and offers some weather resistance. For maximum durability, consider applying a clear topcoat.
Troubleshooting
Paint is dripping or running.
Apply thinner coats and ensure you are holding the can the correct distance from the surface. Avoid spraying too much paint in one area.
Paint is not adhering to the surface.
Ensure the surface is clean, dry, and properly prepared. Lightly sand glossy surfaces. Consider using a primer for difficult surfaces.
No paint comes out of the nozzle.
Shake the can vigorously. Check the nozzle for clogs and clean it if necessary. If the problem persists, try a new nozzle.
Pros and Cons
Pros
Fast drying time saves time on projects.
Provides excellent coverage for a smooth finish.
Minimal drips reduce mess and improve the final look.
Suitable for use on multiple surfaces including wood, metal, and plastic.
Can be used for indoor and outdoor projects.
Cons
Requires proper ventilation when spraying.
Coverage may vary depending on surface and application technique.
May require multiple coats for optimal color and durability.
Color accuracy can vary slightly from the displayed RAL color.
Setup, Compatibility & Care
Preparation: Before use, ensure the surface is clean, dry, and free from rust, loose paint, or grease. Lightly sand glossy surfaces to improve adhesion.
Application: Shake the can vigorously for at least one minute after the mixing ball begins to rattle. Hold the can 10-12 inches from the surface and apply in even, sweeping motions, overlapping each stroke slightly. Apply multiple thin coats rather than one thick coat.
Compatibility: Suitable for use on wood, metal, and plastic. Test on a small, hidden area first to check compatibility.
Care: After use, invert the can and spray until only propellant comes out to prevent clogging. Store the can in a cool, dry place away from direct sunlight and heat.