D-C-Fix Self-Adhesive Vinyl Film - Romeo Grey - 67.5cm x 3m

Dc fix self-adhesive vinyl wraps are ideal for updating kitchen worktops and other surfaces around...

Best current price£19.97from B&Q

All Offers

2 offers from £19.97 - £22.99

View price history by clicking the chart icon.

B&QB&Q - Marble Romeo Grey 67.5Cm X 3M Self-Adhesive Vinyl Wrap For Doors And Worktops
Free delivery in 1–3 days
£19.97
Visit shop
Robert Dyasd-c-fix Marble Romeo Grey Self-Adhesive Vinyl Wrap 67.5cm
£2.95 delivery
£22.99
Visit shop

Product Information

Full details

This D-C-Fix Self-Adhesive Vinyl Film in Romeo Grey is designed for DIY enthusiasts and renters looking to quickly and affordably update surfaces like kitchen worktops, tables, and furniture. Its key benefit is providing a realistic marble effect with an easy, mess-free application and repositionable adhesive. A key caveat is its heat resistance limit of 70°C, requiring the use of worktop savers and hot pan stands.

All features

Model Part Number200-8288-3
Brandd-c-fix

Extended Product Information

FAQs

Is this product suitable for outdoor use?

This product is designed for interior use only. Outdoor conditions like UV exposure and temperature fluctuations can degrade the material and adhesive.

Can I apply this to a textured surface?

For best results, apply to smooth, clean, and dry surfaces. Textured surfaces may prevent proper adhesion and lead to bubbling or peeling.

How do I clean the vinyl film?

Wipe clean with a damp cloth. For tougher stains, use a mild soap and water solution. Avoid using abrasive cleaners or scouring pads.

What is the maximum temperature the vinyl can withstand?

The vinyl is heat resistant up to 70°C. It is not suitable for direct contact with hot pans or dishes.

Can I reposition the vinyl if I make a mistake?

Yes, the water-based adhesive allows you to lift and re-apply the film during the application process if you make a mistake. Simply peel back gently and try again.

How do I remove the vinyl when I want to change it?

Gently heat the vinyl with a hairdryer on a low setting. This will soften the adhesive, allowing you to peel the film away slowly and cleanly.

Is this a continuous roll?

Yes, the material is professionally cut from an original master roll, providing a continuous length of vinyl to minimize waste and ensure a seamless application.

What are the dimensions of this specific product?

This product is 67.5cm wide and is cut to a length of 3m (from a larger 15m roll).

Troubleshooting

Air bubbles or creases during application

Gently lift the vinyl back to the point of the bubble/crease and reapply, using a felt edge smoother to push out air. A credit card can also be used. For stubborn bubbles, a small pin prick may release trapped air.

Vinyl not sticking properly

Ensure the surface is clean, dry, and smooth. Reheat the vinyl slightly with a hairdryer and press firmly. If the surface is porous, the adhesive may not bond effectively.

Vinyl lifting at edges near water

This indicates a need for better sealing. Ensure the edges around sinks, hobs, or wet areas are properly sealed with a good quality silicone sealant.

Difficulty moulding around curves

Use a hairdryer on a low setting. Gently warm the vinyl as you stretch and press it around the curve. Avoid overheating, which can damage the vinyl.

Damage from hot pans

Always use worktop savers or trivets for hot pans. The vinyl's heat resistance is limited to 70°C.

Pros and Cons

Pros

  • Budget-friendly alternative to replacing surfaces
  • Ideal for renters due to its removability
  • Easy to apply and reposition for error correction
  • Realistic aesthetic with a marble-effect finish
  • Durable and easy to maintain with simple wiping
  • Can be moulded around edges for a seamless look

Cons

  • Limited heat resistance (70°C) requires careful use with hot items
  • Requires careful sealing around wet areas like sinks and hobs
  • May not adhere well to heavily textured or uneven surfaces
  • Application requires patience to avoid bubbles and creases
  • Not a factory-sealed retail roll; repackaged by a third party

Setup, Compatibility & Care

Setup: Ensure the surface you are applying the vinyl to is clean, dry, and smooth. Measure and cut the vinyl using the grid on the reverse. Peel back a small section of the backing paper and carefully align the film. Use a felt edge smoother to gradually adhere the film, pressing out air bubbles as you go. For curved edges, use a hairdryer on a low setting to gently warm and mould the vinyl. Spraying the shiny surface with a little water can help the film glide into position and minimize initial creases and bubbles.

Compatibility: This vinyl film adheres best to flat, non-porous surfaces such as laminate, wood, metal, and glass. It is not recommended for heavily textured, rough, or unsealed surfaces.

Care: The vinyl surface is wipe-clean and durable. Clean spills immediately with a damp cloth. For tougher marks, mild soap and water can be used. Avoid abrasive cleaners. Ensure sealant is maintained around wet areas. For removal, gently heat the film with a hairdryer on a low setting to soften the adhesive and peel slowly.

Price History

DatePrice
Visit shop