Best current price£5.06from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£5.06Visit shop Kenable High Quality Stereo Jack 6.35Mm Metal Plug To Plug Cable Lead Black 5M
Visit shop
B&Q£7.85Visit shop B&Q - High Quality Stereo Jack 6.35mm Metal Plug To Plug Cable Lead Black 5M
Visit shop3 offers from £5.06 - £7.85
View price history by clicking the chart icon.
This 5-meter, black Kenable 007386 audio cable is designed for musicians and audio professionals needing a reliable stereo or balanced connection between 6.35mm (1/4 inch) jack devices. Its primary benefit is providing a clear, high-quality signal for live performances or studio recording. A potential caveat is its specific 6.35mm connector size, which may not be compatible with smaller 3.5mm audio jacks.
| Colour | Black |
|---|---|
| Model Part Number | 007386 |
| Brand | kenable |
TRS stands for Tip, Ring, Sleeve. It refers to the three conductive sections on a 6.35mm (1/4 inch) jack plug. For this cable, it indicates a stereo signal (Tip for Left, Ring for Right) or a balanced mono signal (Tip for signal, Ring for cold signal, Sleeve for ground).
This cable has 6.35mm (1/4 inch) connectors, which are larger than standard headphone jacks (typically 3.5mm or 1/8 inch). You would need a 6.35mm to 3.5mm adapter to connect headphones with a 3.5mm plug.
Yes, you can use this cable for mono instruments. When used with mono TS (Tip-Sleeve) or TRS inputs, the cable will function as a standard mono audio cable, carrying the instrument's signal.
The 5-meter length provides flexibility, allowing you to position your instruments, amplifiers, or audio interfaces further apart without being constrained by a short cable. This is particularly useful on stage or in studios where equipment placement is critical.
Specific warranty information is typically provided by the retailer. Please refer to the product packaging or the seller's listing for details on the warranty.
This cable is designed for analog audio signals. It is not intended for digital audio transmission standards like S/PDIF or AES/EBU.
Ensure both 6.35mm plugs are fully inserted into their respective jacks. Check that the source and destination devices are correctly configured for stereo or balanced input/output. Inspect the cable and connectors for any visible damage. Try a different known-good cable to isolate if the issue is with the cable or the equipment.
This can indicate a ground loop or interference. Ensure the cable is properly grounded if it's part of a balanced connection. Keep the audio cable away from power cables or other sources of electromagnetic interference. Try plugging the equipment into a different power outlet or using a power conditioner.
Verify that the cable is suitable for the signal type (stereo/balanced). Ensure the input gain on the receiving device is set appropriately. Check that the connectors are clean and free from oxidation.
Setup: Simply plug one 6.35mm male connector into the audio output of your source device (e.g., instrument, audio interface) and the other male connector into the corresponding input of your destination device (e.g., amplifier, mixer, speakers). Ensure both devices are powered off before connecting or disconnecting cables to prevent audio pops or potential damage.
Compatibility: This cable is compatible with any audio equipment featuring 6.35mm (1/4 inch) TRS (Tip-Ring-Sleeve) stereo or balanced mono jacks. It is *not* compatible with 3.5mm (1/8 inch) mini-jacks without an adapter.
Care: To maintain optimal performance, avoid kinking the cable sharply. Store the cable loosely coiled when not in use. Clean the connectors periodically with a dry, lint-free cloth to remove dust or debris. If necessary, a slightly damp cloth can be used on the PVC jacket, but ensure the cable is completely dry before reconnecting.
